Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Irving
If your fireplace has sat cold since the last power outage, or you smelled smoke in the living room the first time you lit it this year, a chimney sweep is the place to start. We provide chimney sweep, inspection, and repair services to homeowners across Irving, from the older ranch streets of south Irving to the master-planned blocks of Las Colinas and Valley Ranch. We know how this city’s homes are built and how they burn. Our technicians have up to 11 years of experience, and we work with professional-grade materials like HeatShield and Olympia Chimney. Call (855) 955-5057 to book a sweep. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Irving Homeowners Call Irving Chimney Cleaning for Chimney Sweep
We’re a chimney specialist, not a handyman outfit that adds sweeping to a long list. That focus is why Irving homeowners keep our number. We handle all three pillars of chimney care – sweeping, repair, and inspection – so the same company that cleans your flue can tell you what it needs and fix it, with no handoff and no gaps in who’s accountable.
Our Irving customers tend to be detail-oriented people who want a straight assessment rather than a sales pitch. When we sweep, we include a documented inspection and can show you what we found. If something looks fine, we say so. If a liner is failing, you see the evidence before anyone recommends work.
We know the local housing. In the 1960s-90s homes across south Irving, most fireplaces are original masonry, and plenty haven’t had a proper sweep in years. In the newer Las Colinas and Valley Ranch subdivisions, we’re more often looking at prefab metal fireboxes that owners assumed were maintenance-free. Both need attention, just different kinds. That local knowledge shapes how we approach every Irving job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning in Irving
Chimney Cleaning in Irving needs to account for how fireplaces here actually get used: long idle stretches broken by intense burning during winter power outages. A standard sweep removes soot and creosote from the flue, checks the firebox and damper, and confirms the flue is clear of nests and debris. You need one when you move into a home with an unknown history, when you’ve burned a full season, or when smoke starts backing into the room. A typical chimney cleaning in Irving runs $150-$290, and we set the final price with a written estimate before we start.
What a Standard Sweep Covers
A sweep includes brushing the flue, cleaning the firebox and smoke shelf, and a visual check of the damper and cap. We contain the dust and haul away the debris. You get a clear report of what we found, not a vague “all good.”
When to Book Before the Season
Late summer and early fall are the smartest window, before the first cold snap sends everyone to the phone. Booking ahead means a clean flue when you actually need the fireplace, which matters in a city where an ice storm can turn the grid off without warning. If it’s already cold, call anyway. We’ll find you an opening.
Fireplace Cleaning in Irving
Fireplace Cleaning in Irving goes beyond the flue – it covers the firebox itself, the glass, the damper, and the firebox floor where ash and creosote collect. Many Irving fireplaces sit unused for months, and a full clean handles the soot film that builds up on the surrounding masonry or the metal panels of a prefab insert. It’s worth doing before the first burn and again if you’ve had a smoky season. A typical fireplace cleaning in Irving runs $120-$250 depending on the firebox type.
Masonry Versus Prefab Fireboxes
Older masonry fireplaces in south Irving take longer to clean because soot works into the brick and mortar joints. Prefab metal fireboxes in Valley Ranch are faster but need manufacturer-specific care so the panels and refractory liners aren’t damaged. We handle both.
Clearing Smoke Backup
If your fireplace puffs smoke into the room, the cause is often a blocked or glazed flue, a closed damper, or wet wood. A clean and an inspection will tell you which. We don’t guess.
Trusted Brands We Service in Irving
We work with professional-grade chimney products, and that matters when a repair is on the table. For interior liner resurfacing, we use HeatShield. For relining a damaged flue, DuraFlex is the system we trust. On the cap and venting side, we work with Gelco and Famco components, so we can address the whole chimney system – not just the flue. We don’t stock parts; we source what your chimney needs and turn it around quickly. If you call about a failing liner or a missing cap, we’ll diagnose it, show you what we found, and set up the repair with the right materials. Our chimney sweep team handles the clean side too, so one call covers it.
Common Chimney Sweep Problems We See in Irving Homes
- Prefab fireboxes assumed maintenance-free. Owners in newer Irving subdivisions often skip sweeping because the insert is metal, not brick. Creosote still builds in the flue liner until draft fails or a flue fire starts.
- Green wood burned during outages. When the power goes out, people grab whatever wood is stacked outside and close the damper. That unseasoned wood produces third-degree creosote a brush can’t cut.
- Missing or damaged caps. Many older Irving masonry chimneys have no proper cap. Chimney swifts and starlings nest in uncapped flues by April, blocking the flue and causing smoke to back up.
- Storm-driven creosote bursts. Fireplaces that sit idle for months see sudden intense use during ice storms. Creosote builds in concentrated bursts rather than gradually, so the safe interval runs shorter here.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Irving, TX
We believe in straight pricing. A typical chimney sweep in Irving runs $150-$290. Fireplace cleaning runs $120-$250. A Level 1 inspection starts around $99-$150, and a Level 2 inspection with a camera runs $185-$350. Creosote removal beyond a standard sweep adds to the base price when the buildup is glazed or heavy – which is common here after a storm-heavy season. What affects the number most is the flue condition, whether there’s third-degree creosote, and the firebox type. We give you a written estimate before any work begins, and the estimate sets the final price. No service-call fee, no surprises added afterward. If your chimney is fine and can wait, we’ll tell you that too. Estimates are free.
We Also Serve Cities Near Irving
Irving sits in the middle of the Metroplex, and we regularly take calls from homeowners just outside the city line. Whether you’re in Farmers Branch to the north, Cockrell Hill to the southeast, Coppell to the northwest, or Euless to the west, we can help. The same storm-driven creosote and spring nesting problems show up across these communities, so the advice holds. Call us and we’ll find a time that works.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Irving
Once a year, even with light use. Irving’s weather pattern is the reason: long idle stretches followed by intense burning during winter power outages mean creosote builds in concentrated bursts rather than gradually. A flue that looks clean in October can be heavily glazed by March. We recommend an annual sweep and inspection so you catch buildup before it becomes a flue fire risk. If it’s been more than a year, book now. Call (855) 955-5057 for an exact quote – estimates are free.
Smoke backup after an outage usually comes from a blocked or glazed flue, a closed damper, or wet wood burned under stress. When the grid fails, many homeowners burn green firewood and load the flue with first- and second-degree creosote. The next time you light it, draft can’t clear the smoke. A sweeping and inspection will pinpoint the cause. Call (855) 955-5057 to schedule.
Yes – prefab fireboxes need sweeping just like masonry. This is one of the most common misconceptions we see in Valley Ranch and Las Colinas. Owners assume the metal insert is maintenance-free, but creosote still builds inside the flue liner. If it’s never been swept, it’s overdue. Call (855) 955-5057 for an estimate.
Chimney swifts and starlings are the likely culprits, and they nest in uncapped flues by April. Many older Irving masonry chimneys lack a proper cap, which leaves the flue open to birds, rain, and debris. A nest blocks the flue and causes smoke backup. The fix is a sweep to clear it and a cap to prevent it next season; we work with Gelco and Famco cap components. Call (855) 955-5057.
First-degree creosote is light soot a brush removes easily. Second-degree is flaky and harder, but still brushable. Third-degree is glazed, tar-like, and can’t be removed with a brush – it needs chemical treatment or liner work. After an ice-storm season of green wood and closed dampers, third-degree buildup is common in Irving. We identify the stage during inspection and price the removal honestly. Call (855) 955-5057 – estimates are free.
Book Your Irving Chimney Sweep
Whether you need a routine sweep, a fireplace cleaning, or a documented inspection, the team at Irving Chimney Cleaning is ready to help. We specialize in chimneys – sweep, repair, and inspection under one roof – and we work with the professional brands that hold up. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.