Chimney Inspection in Irving, TX | Irving Chimney Cleaning

Chimney Inspection in Irving - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Irving Homeowners

Most chimney problems in Irving announce themselves quietly: a faint creosote smell when the fire is lit, a streak of rust on the firebox, a bit of daylight where the damper should close flat. By the time smoke backs into the room or brick crumbles onto the hearth, a small issue has usually been working for a couple of seasons. That’s what an inspection is for – finding it while it’s still small.

Call (855) 955-5057

Our technicians have up to 11 years of experience reading exactly these signals, and we do all three parts of the work under one roof: Irving Chimney Cleaning sweeps, repairs, and inspects, so nothing gets handed off and nothing gets missed between visits. We work with DuraFlex liners, HeatShield resurfacing, and Gelco caps, which means we can identify a problem and fix it rather than just report it. Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Fireplace Inspection

Fireplace Inspection covers the firebox, damper, smoke shelf, firebrick, and the visible flue, all checked as one working assembly. You need one before the first burn of the season, after any chimney fire, when you move into a home with an older masonry fireplace, or if smoke, odor, or draft performance has changed. Irving Chimney Cleaning checks the firebrick for spalling and open joints, verifies the damper seats and seals, examines the smoke shelf for the creosote ledge that causes downdrafts, and confirms the firebox-to-flue connection is sound. A fireplace inspection in Irving typically runs $125 to $250, and a Level 2 version with camera work runs $200 to $400. The written estimate sets the final price.

What the Firebox Check Reveals

The firebox takes the most direct heat in the whole system, so it’s where masonry damage shows first. Spalling brick and washed-out mortar joints let heat reach the framing behind, and a crack straight through the firebox wall opens a path that no flue liner can close. We map those joints and tell you which ones are cosmetic and which ones can’t wait.

Damper and Smoke Shelf

A damper that no longer seals lets conditioned air escape all summer and lets cold air drop into the room. The smoke shelf above it collects soot over time, building a ridge that pushes smoke forward into the room instead of up the flue. We check both, clean what’s blocking them, and note whether the damper frame is still true.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney Inspection Services at Irving Chimney Cleaning are built around the three recognized levels, and we tell you upfront which one your situation calls for so you’re not paying for depth you don’t need. You need an inspection on a routine schedule, at a real estate transaction, after a fire, after a lightning strike or earthquake, or when you change fuel type or appliance. We provide a documented written assessment of the chimney’s condition, with photos of what we find so you can see the evidence rather than take a report on faith. Basic inspections typically run $125 to $250, and camera-assisted inspections run $200 to $400. The written estimate sets the final price.

Three Inspection Levels

Level 1 is a visual check of the readily accessible parts – firebox, damper, flue from the firebox, cap, and exterior. Level 2 adds a video scan of the entire flue plus attics and crawl spaces where accessible, and it’s what we recommend for sales, after a fire, or whenever the flue has been modified. Level 3 opens concealed areas of the chimney when the first two levels point to a hidden problem.

Three Inspection Levels

What the Report Includes

You get the findings in writing, with clear language about what’s safe to run, what needs watching, and what needs repair before the next fire. We separate the urgent items from the maintenance list so you can plan rather than panic. If something can safely wait a season, we say so plainly.

What the Report Includes
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 955-5057

Chimney Flue Inspection

Chimney Flue Inspection focuses on the inside surface of the flue, the part of the system that carries every ounce of smoke and heat out of your home. You need one whenever creosote has had time to build, after a fire, when you smell smoke in the house with no fire lit, or when a liner’s condition is unknown. Irving Chimney Cleaning scans the full flue for cracked or missing clay tiles, gaps in mortar joints, glaze-stage creosote, and signs that a previous liner has failed. Flue inspections typically run $125 to $250, with camera-assisted work at $200 to $400. The written estimate sets the final price.

Creosote Stages and Risk

Creosote moves from a light soot to a crusty flake and finally to a shiny, tarlike glaze that ignites at a relatively low temperature. Glaze-stage creosote is what turns a routine sweep into a fire hazard, and it can’t be brushed off with a standard nylon brush once it hardens. Identifying the stage matters, because it decides both how we clean and how urgent the job is.

Clay Tile and Joint Condition

Older masonry flues are lined with clay tiles set in mortar, and those joints crack as the chimney expands and contracts across hot and cool cycles. A crack thinner than a hair still opens a path for heat and carbon monoxide into the wall cavity. We check tile alignment and joint integrity from the top of the flue down.

Chimney Fire

Chimney Fire is the event every inspection is quietly working to prevent, and it’s the main reason you close the air supply and call before relighting. You need an inspection after any chimney fire, even a small one you put out yourself, because the damage often sits where you can’t see it. Irving Chimney Cleaning inspects for cracked tiles, warped dampers, distorted caps, and heat-damaged masonry after a fire, then tells you what has to be repaired before the chimney is used again. Post-fire inspections typically run $125 to $250, and camera scans to find hidden damage run $200 to $400. The written estimate sets the final price.

What a Chimney Fire Damages

Most chimney fires burn hot and short, which is exactly the kind that cracks flue tiles without much visible smoke in the room. The mortar between tiles takes the hit first, and creosote can reignite in the same spot on a later burn. That’s why we inspect the flue after every event, even a minor one.

Signs One Happened

Watch for a loud rumble like a freight train, puffs of black smoke from the top, a sudden drop in draft, or a strong smoky smell that lingers inside the house. Dark, glassy patches on the flue walls are the telltale mark left behind. If you saw any of these, don’t relight until the flue has been inspected.

Level 2 Chimney Inspection

Level 2 Chimney Inspection is the most commonly recommended inspection for real estate transactions, after a chimney fire, after a major weather event, or any time the flue system has been altered. Irving Chimney Cleaning uses a video camera lowered through the full length of the flue to look for defects the eye misses from the firebox. It also covers accessible parts of the attic and crawl space, the exterior of the chimney, and the cap and crown, plus a check on connector pipes from any appliance. Level 2 inspections in Irving typically run $200 to $400 depending on chimney height, access, and how many appliances connect. The written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

When Level 2 Is Required

Buying or selling a home is the clearest trigger, and most lenders and buyers expect it. A change of appliance – say, switching from a wood-burning fireplace to a gas insert – also calls for it, as does a resized or newly installed liner. Any event that might have damaged the flue, including a chimney fire or tornado, moves you up to Level 2 as well.

Camera and Access

We lower a camera from the top down through the full flue, recording what we find so you can review it. Access to the attic and crawl space is arranged where possible, and the exterior of the chimney gets a close visual pass from the roofline. If something blocks access, we tell you what we could and couldn’t see.

Chimney Leak

Chimney Leak is water getting in where it shouldn’t, and in North Texas it usually announces itself as a ceiling stain well away from the fireplace, which is why homeowners don’t connect the two. You need an inspection when you notice water streaks on the firebox, a musty smell in the room, rust on the damper, or missing chunks of the crown. Irving Chimney Cleaning checks the cap, crown, flashing, and masonry joints, then tells you which defect is actually letting the water in. Leak inspections typically run $125 to $250, with camera work at $200 to $400. The written estimate sets the final price.

Common Entry Points

A cracked crown is the most frequent culprit, because it lets water soak into the masonry from the top down. A missing or damaged cap lets rain straight into the flue, while failed flashing at the roofline opens a gap between the chimney and the roof deck. Step flashing and counter-flashing are where roofers and chimney work most often disagree.

Fixing the Source, Not the Stain

Patching a ceiling stain without addressing the chimney guarantees it comes back after the next hard rain. We identify the actual entry point and repair that, whether it’s a crown rebuild, new flashing, or a properly sealed cap. You get photos of the defect before and after, so the repair is something you can verify.

Chimney Camera Inspection

Chimney Camera Inspection puts an actual video eye inside the flue, and it’s how you find the cracks, gaps, and offsets that a visual check from the firebox can’t reach. You need one whenever the flue has never been scanned, after a chimney fire, at a home sale, or before deciding on a reline. Irving Chimney Cleaning runs a camera the full length of the flue and records the footage, noting every tile crack, mortar gap, and disconnected section it passes. Camera inspections typically run $200 to $400. The written estimate sets the final price.

What the Camera Sees

The camera catches missing or misaligned flue tiles, hairline cracks in mortar joints, creosote buildup at the glaze stage, and the broken sections that a liner has to span. It also reveals offsets and bends where a rigid liner won’t pass but a DuraFlex liner can. None of these show up in a standard visual inspection.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 955-5057

Why Recorded Evidence Matters

Every homeowner’s real fear is being told they need thousands in liner or masonry work with no way to check it. A recording puts that question to rest. You see what we see, so you can decide on the repair with clear evidence instead of a verbal claim.

Brands We Service

We work with professional-grade brands that chimney specialists actually install, and that expertise shapes how we inspect and what we recommend. HeatShield is a resurfacing system for the inside of a masonry flue, so when we find a cracked tile with otherwise sound structure, we can talk through resurfacing versus a full reline honestly. Gelco and Famco cover caps and venting, which is where a surprising number of leaks and downdraft problems originate. Olympia Chimney is another brand we recognize on sight, and knowing its fittings and tolerances makes an inspection faster and more accurate.

Recognizing the brand matters because every system wears differently, and a generic look-down-the-flue check misses the failures specific to each one. Whether you have HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help, and we’ll tell you clearly when a repair can wait and when it can’t. If the work involves liner relining or interior resurfacing, we can handle that too, so you’re not left calling around for a second company.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Signs You Need a Pro Right Now

  • Smoke backing into the room. A damper that won’t open fully, a soot-clogged smoke shelf, or a partial flue blockage will push smoke forward instead of up. It’s a draft failure, not a wood problem, and it gets worse the colder it gets.
  • A strong creosote smell when the fire isn’t burning. That odor means creosote has built up enough that warm weather releases fumes from it. Glaze-stage creosote is a fire risk, not just a smell, so it deserves a look before you burn again.
  • Water stains or a musty smell near the chimney. Water is coming in somewhere, whether through the crown, the flashing, or a missing cap. Left alone, it rots the masonry and the framing around it.
  • Visible cracks in the firebox or flue tiles. A crack that reaches the framing opens a path for heat and carbon monoxide. A camera scan tells you the full extent instead of guessing from what’s visible.
  • A chimney fire, even a small one. A rumble, black smoke, or a loud pop means damage may sit inside the flue. Don’t relight until an inspection confirms the flue is sound.

Our Process, Step by Step

  1. 1
    Book a time and confirm which inspection level fits. We ask a few questions about the chimney’s history, the appliance, and anything you’ve noticed, then recommend a level so you’re not paying for depth you don’t need. The flat price is agreed before we book.
  2. 2
    Set up for a clean sweep-through. We lay drop cloths and use a HEPA vacuum at the firebox so soot stays contained. Nothing goes into the room, and nothing gets tracked through the house.
  3. 3
    Inspect the system from both ends. We check the firebox, damper, and smoke shelf from inside, then the cap, crown, flashing, and masonry from the top. Our technicians have up to 11 years of experience reading the wear patterns at each point.
  4. 4
    Run the camera where needed. For a Level 2 or a suspected liner problem, we lower a camera the full length of the flue and record it. You see the footage, so the recommendation is based on evidence, not a sales pitch.
  5. 5
    Write up the findings and agree on next steps. You get a documented report with photos, a clear split between urgent repairs and things that can wait, and a written estimate if repair is needed. Nothing is recommended without camera evidence you can see for yourself.

How Much Does Chimney Inspection Cost in Irving?

A basic Level 1 chimney inspection in Irving typically runs $125 to $250 depending on chimney height, roof access, and how much of the system is readily visible. A Level 2 inspection with full camera work usually runs $200 to $400, with the upper end reflecting taller chimneys, multiple appliance connections, or tight attic and crawl space access. Fireplace inspections on their own typically run $125 to $250, and leak inspections sit in the same range unless the crown or flashing requires a closer look from the roof. When an inspection turns up a liner problem, a reline with a DuraFlex liner runs higher and is quoted separately once the scan is reviewed. Resurfacing a masonry flue with HeatShield is a different scope again, and it’s often the smaller job when the structure is still sound.

What moves the price most is access: a chimney you can reach from a flat roof in a newer Irving home is faster to inspect than one with a steep pitch and a tight chase. Camera work adds cost because it takes time to run the flue and document it. The number of appliances connected – a wood fireplace plus a furnace flue, for instance – also matters, since each one gets checked.

The cheapest way to avoid overpaying is to know the difference between an inspection and a sale. A visual look is not a camera scan, and a scan is not a reason to buy a liner on the spot. Ask which level you’re getting, and ask to see the footage before any repair gets approved. If a company can’t show you the defect, wait.

Our estimates are free, and the price is set per job by the written estimate, so there’s no surprise on the day. What’s included is the full inspection, the documentation with photos, and a written summary of what needs fixing and what can safely wait. Call (855) 955-5057 for an exact quote.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Our Service Area Near Irving

We work throughout Irving and the surrounding Metroplex, including Double Oak, Hackberry, Shady Shores, Euless, Farmers Branch, Coppell, Grapevine, Cockrell Hill, and Bedford. Houses in older neighborhoods here often have masonry chimneys that haven’t been scanned in years, and that’s where a camera inspection earns its keep. We also handle work in Double Oak and Hackberry, and you can check our Irving page for details on the local area. Response times depend on where you are and what’s already booked, and we’ll give you a clear window when you call.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Irving

Schedule Your Chimney Inspection Service in Irving Today

An inspection is cheap compared to the repairs it prevents, and it’s the one step that tells you whether the chimney is ready for the burning season. Our technicians have up to 11 years of experience, and we document everything with photos and camera footage you can review. Call (855) 955-5057 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Irving Chimney Cleaning.

Why Irving Chooses Irving Chimney Cleaning

We set the standard for chimney inspection in Irving.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your chimney inspection project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney inspection project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Bryce Padgett
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Renee Hayes
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Colleen Doyle

Ready for Chimney Inspection in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Irving.

(855) 955-5057

Request a Free Estimate in Irving

Tell us about your chimney inspection needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7