Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Coppell
If your chimney cap looks hammered after a hailstorm or you’re seeing water stains near the chase, you’re in the right place. We handle chimney repair in Coppell for the kind of homes that dominate this town: mostly 1980s – 2010s brick and stone builds in planned subdivisions, with factory-built fireplaces and two-story exterior chases rather than century-old masonry. That changes what repair actually means here. Coppell chimneys usually need cap, crown, chase-cover, and flashing work plus proper documentation, not a full brick smoke-chamber rebuild. Same-day service is often possible, and fast dispatch runs 7am to 7pm. Call (855) 955-5057 to book a free estimate.
Why Coppell Homeowners Call Irving Chimney Cleaning for Chimney Repair
We specialize in chimneys only: sweep, repair, and inspection under one roof. That focus matters in Coppell, where the diagnosis often hinges on understanding a prefab firebox or a direct-vent system as much as the brick around it. The company that cleans your flue can also repair and inspect it, so there’s no handoff and no gap in accountability.
Our technicians have up to 11 years of experience, and we work with professional-grade materials like HeatShield resurfacing and Olympia Chimney components. When we recommend a repair, it’s tied to what the camera actually shows, not a guess. Coppell sits in the DFW humid subtropical zone with long hot summers, mild winters, and spring hail and wind that dent caps and crack crown mortar, so the call drivers here are specific. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Coppell
Chimney Flashing Repair in Coppell is one of the more common jobs we see, especially on 1990s – 2010s homes where the original sealant at the roof-to-chimney transition has aged and let water in. Flashing is the metal (and sealant) that keeps rain from running down the gap between your chimney chase and the shingles. When it fails, water finds the attic or ceiling, and the damage shows up far from the chimney itself. A typical flashing repair in Coppell runs $275 – $650, depending on pitch, access, and whether the existing metal can be resealed or needs replacement. If a roofer is already involved, we document what we find so the two trades aren’t working against each other.
What the repair involves
A technician inspects the flashing, step flashing, and counter-flashing for gaps, lifted edges, and rusted sections. We photograph the problem before touching it, then re-seal or replace as needed. If the leak has tracked into the chase, we say so plainly and show you why.
When to book it
Book flashing repair if you see staining on ceiling drywall near the chimney, a musty smell in the attic, or visible separation where the chimney meets the roof. Catching it early avoids rot in the roof deck.
Chimney Crown Repair in Coppell
Chimney Crown Repair in Coppell addresses the concrete cap on top of a masonry chimney, the part that sheds water away from the stack. North Texas freeze-thaw cycles crack crown mortar, and once cracks open, moisture gets into the brick and spalls the chase over time. Hail adds to it. A typical crown repair in Coppell runs $350 – $900, depending on size, whether the crown can be resurfaced or must be rebuilt, and how much spalling sits underneath. We use HeatShield where a resurfacing approach fits the condition of the crown and flue.
Cracks worth a second look
Hairline cracks that run through the whole crown are the ones that matter; surface crazing usually isn’t. A technician checks the crown from the roof and shows you the footage side by side. If it can safely wait a season, we’ll tell you that too.
What repair includes
Repair involves cleaning out the failed mortar, rebuilding or resurfacing the crown with a proper slope, and sealing it. A well-formed crown throws water off the chase instead of letting it soak in.
Trusted Brands We Service in Coppell
We work with an industry-recognized roster of professional chimney brands, and that product knowledge shows up in how we diagnose and specify repairs. DuraFlex liner systems and HeatShield resurfacing cover the flue and interior work; Gelco and Famco handle caps, chase covers, and venting components; Olympia Chimney rounds out the prefab and direct-vent side that so many Coppell homes rely on. We don’t claim to stock parts on a truck or in a warehouse. What we do is spec the right component for your system, order it, and turn the repair around without guesswork. That’s the difference between a generalist with a brush and a company that addresses the whole chimney as a system.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Coppell Homes
- Hail-dented caps and loose chase covers on two-story brick chases. Coppell’s straight-line winds and spring hail beat up the cap and chase cover, and a loose cover lets water and pests straight into the chase. Left alone, that turns into rot and rusted framing.
- Cracked crown mortar from freeze-thaw cycles. Occasional hard freezes crack the crown, trap moisture, and start spalling in the brick chase. Repairing the crown early is far cheaper than addressing the brick later.
- Deteriorated flashing on 1990s – 2010s homes. Original sealant at the roof-to-chimney line ages out, and leaks show up in the attic or ceiling. Flashing is the first thing we check when water is the complaint.
- Third-degree creosote glaze in prefab fireboxes used with gas logs. Glazed creosote bonds hard and a brush won’t remove it; it needs specialized chemical treatment. Gas-log and insert setups also need termination and venting checked to manufacturer spec.
Pricing for Chimney Repair in Coppell, TX
Pricing for chimney repair in Coppell is set per job by a written estimate, so the number you get is the number tied to your chimney, not a phone quote. As a general guide, flashing repair typically runs $275 – $650, crown repair $350 – $900, and cap or chase-cover replacement $200 – $550, depending on access and materials. Larger jobs like tuckpointing, spalling brick repair, or a partial rebuild climb from there. What moves the price is roof pitch, whether the chase is two-story, how much underlying damage the camera reveals, and the specific components your system needs. The estimate is free, and we won’t recommend a repair without showing you the evidence first. Call (855) 955-5057 for a free estimate.
We Also Serve Cities Near Coppell
We also work in Grapevine, Farmers Branch, Double Oak, and Irving, so neighbors around the metro get the same prefab-and-masonry know-how. If your chimney is outside Coppell, our chimney repair team covers the surrounding area, and Coppell homeowners can book a free estimate the same way. One call, one specialist, one accountable relationship.
Serving Coppell, TX – Our Local Coverage Area
We serve Coppell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Coppell
Usually it needs an inspection first, and the answer comes from what the camera shows, not from the build year. A 2005 prefab fireplace may only need a cleaning, or it may have a damaged cap, cracked chase cover, or venting that needs verification to manufacturer spec. We inspect, document, and tell you plainly whether repair is needed now or can wait. Call (855) 955-5057 for a free estimate.
You often can’t tell from the ground, which is why a roof-level look matters. Cracks from freeze-thaw usually run through the crown; hail damage shows as pitting or broken edges. A technician checks the crown and shows you the footage so you can see it yourself. Call (855) 955-5057 for a free estimate.
Yes, flashing repair is one of the most common jobs in Coppell’s 1990s – 2010s subdivisions, because original sealant at the roof-to-chimney transition ages out. Water then tracks into the attic or ceiling. We inspect, photograph, and re-seal or replace as the condition requires. Call (855) 955-5057 for a free estimate.
Yes, you’ll see the camera evidence before any repair is recommended. We inspect the cap, crown, flashing, chase, and flue, then walk you through the footage and explain what’s urgent and what can wait. Nothing gets recommended without it. Call (855) 955-5057 for a free estimate.
Yes, gas-log and direct-vent setups need the termination and venting verified to manufacturer spec, and glazed creosote in a prefab firebox needs specialized chemical treatment rather than a brush. That’s a different job from a masonry wood-burner. A qualified technician documents the setup so repair and resale records are correct. Call (855) 955-5057 for a free estimate.
Whether you’ve spotted a leak near the chase or want a straight answer before the burning season, we’re here to help. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.