Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irving, TX
Chimney inspection in Irving, TX starts with the weather this city actually gets. North Texas swings from 100°F summers to hard freezes and ice storms, and when the grid fails, Irving homeowners fall back on fireplaces they may not have used in months. That pattern builds creosote in concentrated bursts rather than gradually. We provide three services here: inspection, sweeping, and repair. Our technicians have up to 11 years of experience, and we work with professional-grade brands like DuraFlex and HeatShield. Call (855) 955-5057 to book a visit.
Why Irving Homes Are Different
Irving’s housing stock splits in a way that changes how we work. South Irving holds mostly 1960s-90s single-family homes with original masonry fireplaces, some neglected for a decade or more. Las Colinas and Valley Ranch carry 1980s-2000s construction with prefab metal fireboxes in many of the newer subdivisions. Those prefab units need manufacturer-specific sweeping, and they’re often overdue because owners assume a factory-built fireplace needs no maintenance at all.
Then there’s the ice-storm factor. When a February storm knocks out power in Valley Ranch or south Irving, thousands of homes fall back on wood-burning fireplaces they otherwise rarely touch. Homeowners stuff in green firewood and close the damper, then call us about a smoking chimney. That sudden heavy use produces creosote loads no gradual burning pattern would create, and it drives a spring rush of flue fires across the city.
Spring brings a second Irving problem. Many older masonry chimneys here lack a proper cap, so chimney swifts and starlings nest in open flues by April. A nest is a blockage, and a blocked flue sends smoke and carbon monoxide back into the house instead of up and out.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Irving Services
Two calls come in more than any other from Irving homeowners, and both start with the same question: what’s actually going on inside the flue?
Chimney Sweep in Irving
Sweeping in Irving means removing the creosote that built up during a single cold snap, not the thin seasonal layer you’d see in a milder climate. We brush the flue with the right tool for the liner type, because a prefab firebox in Las Colinas and a masonry chimney in south Irving do not take the same approach. We contain the dust, haul out the soot, and show you what came down. For the full breakdown of what a visit involves, see Chimney Sweep in Irving.

Chimney Repair in Irving
Repair work here usually traces back to a missed cap or a liner that cooked through during a power-outage winter. We handle relining with DuraFlex, interior resurfacing with HeatShield, and cap and venting work with Gelco and Olympia Chimney products. Glass fiber and refractory panels in older prefab units get checked too, since a cracked panel lets heat reach the framing behind it. When the flue itself needs work, Chimney Repair in Irving covers what we do and how we price it.

Chimney Inspection in Irving
Chimney inspection in Irving is how you find out whether a hard-freeze winter left damage behind, and it matters most in homes that burned heavily during an outage and then sat untouched for months. The city’s split housing stock makes it more useful than in a uniform market: a 1970s masonry chimney in south Irving has different failure points than a prefab insert in Valley Ranch, and an inspection tells you which ones apply to your house. Our full Chimney Inspection service covers the firebox, damper, flue, cap, and the exterior masonry the chimney depends on. Nothing gets recommended without evidence you can look at yourself.
Fireplace Inspection
Signs you need it
You smell smoke in the room when the fire is burning, the damper sticks or won’t seal, or the firebox brick shows cracks and missing mortar you can see without a flashlight.
What it costs in Irving
A fireplace inspection typically runs $100 to $200 in Irving, with the written estimate setting the final price.
How we do it
We examine the firebox walls and floor, test the damper through its full range, check the smoke chamber and smoke shelf above it, and photograph anything we find.
Level 2 Chimney Inspection
Signs you need it
You’ve had a chimney fire, the house changed hands, you’ve noticed water stains on the ceiling near the chimney, or the flue has never been camera-checked in this home.
What it costs in Irving
A Level 2 chimney inspection typically falls between $150 and $400 in Irving depending on access and how much of the flue we can reach.
How we do it
We run a video camera the length of the flue, check the attic and roof-level connections, and record the interior condition so you can see every joint and offset.
What Chimney Inspection Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Fireplace inspection | $100 – $200 |
| Level 2 chimney inspection | $150 – $400 |
| Flue camera inspection with recorded findings | $150 – $350 |
Will an inspection tell me if my Irving chimney is safe to use this winter?
Yes. The inspection reports the actual condition of the flue, liner, damper, and firebox, so you know before burning season whether the chimney can safely carry a fire or needs repair first.
Do older south Irving masonry chimneys need a Level 2 inspection?
Usually yes. Masonry from the 1960s and 70s has often gone a decade without a camera check, and hidden liner gaps don’t show up from the hearth. A Level 2 inspection finds them. Call (855) 955-5057 for an exact quote, because estimates are free.
Brands We Service in Irving
We work with professional-grade chimney brands: DuraFlex for relining, HeatShield for interior resurfacing, and Gelco and Olympia Chimney for caps and venting. We don’t claim to stock parts locally; we assess what your chimney needs, then source the right component for the job. Turnaround depends on the part and the weather. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Fireplace inspection | $100 – $200 |
| Level 2 chimney inspection | $150 – $400 |
| Flue camera inspection with recorded findings | $150 – $350 |
| Standard chimney sweep | $150 – $300 |
| Prefab fireplace sweep | $150 – $250 |
| Sweep plus inspection package | $200 – $450 |
| Chimney cap installation | $150 – $400 |
| Chimney crown repair | $250 – $800 |
| Damper repair or replacement | $200 – $600 |
| Masonry tuckpointing | $300 – $1,200 |
| Flue relining with DuraFlex | $1,800 – $4,500 |
Two things push price up in Irving: a prefab unit that needs manufacturer-specific handling, and a chimney that sat uncapped long enough for water damage to reach the crown and masonry. We quote upfront and in writing before any work starts, so the number you agree to is the number you pay.
Neighborhoods We Serve in Irving
We work across Irving, from the older streets of south Irving to the master-planned sections of Las Colinas and the family homes of Valley Ranch. Housing era tells us a lot before we arrive: masonry fireplaces downtown-side, prefab inserts north and west. Wherever you are in the city, book a visit and we’ll confirm the timing with you.
- South Irving
- Las Colinas
- Valley Ranch
- Hackberry Creek
- University Hills
Service Area – Cities Near Irving
Irving sits in the middle of the Metroplex, and we take chimney work in the communities around it. If you’re just outside the city line, we can usually help. We book calls in Farmers Branch, TX, Cockrell Hill, TX, Coppell, TX, and Euless, TX. The climate and housing patterns are close cousins to what we see in Irving, so the approach carries over.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irving
Most Irving addresses get a visit within a day or two of booking. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 955-5057 to set a time.
It depends on the scope. Structural masonry changes often need one, while a sweep or an inspection typically doesn’t. Ask the City of Irving building department before major work, and we’ll tell you what our part involves.
We cover all of Irving, including south Irving, Las Colinas, Valley Ranch, and the neighborhoods in between. If you’re near the city line, call and we’ll confirm whether your address falls in our service area.
If your fireplace saw heavy use during the last outage, or it’s been years since anyone looked up the flue, now is the time to book. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bryce Padgett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Renee Hayes"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Colleen Doyle