Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Irving
Chimney repair in Irving usually comes down to two very different chimneys. In Las Colinas and Valley Ranch, we’re often working on factory-built fireplaces from the 1980s through the 2000s, where the fix means matching a specific flue or cap component to the original unit. In south Irving, it’s older masonry that has gone a decade or more without attention. We know which parts of the city have which, and it changes how we approach the job before we ever open a toolbox. Call (855) 955-5057 and we’ll book an inspection.
Why Irving Homeowners Call Irving Chimney Cleaning for Chimney Repair
We handle three things: sweeping, repair, and inspection. That focus is the reason a repair call here isn’t a handoff between a sweep who spots a problem and a mason who never saw the inside of the flue. The same company that diagnoses the issue is the one that fixes it, so nothing gets lost between visits.
Our technicians have up to 11 years of experience, and they work with professional-grade brands like DuraFlex, HeatShield, Olympia Chimney, and Gelco – the names that actually matter when a factory-built unit needs a manufacturer-specific part rather than a generic substitute. We can work with your insurer on covered damage, and we document our findings with photos so you’re not taking anyone’s word for what’s wrong.
Response times to Irving are straightforward. When you call, we book you into the next available opening, Sunday through Friday, 7am to 7pm, and the phone line itself is answered 24/7. We don’t promise a technician within the hour. What we do promise is a clear picture of what your chimney needs before anyone recommends a dollar of work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Irving
Chimney Flashing Repair in Irving is one of the most common fixes we make on prefab chases, because the flashing is the first thing to fail when a chase cap works loose. Flashing is the metal collar where the chimney meets the roof. When it lifts, wind-driven North Texas rain gets underneath it and runs down the outside of the chase, rusting the top of the flue liner from the outside in. You’ll usually spot it as a water stain on the ceiling near the chimney, or as rust streaks on the chase itself. A flashing repair in Irving typically runs $250 – $600 depending on roof pitch, how much of the old flashing has to come off, and whether the cap needs reseating at the same time.
Water Stains Near the Chase
Staining on the ceiling or the chase siding almost always traces back to a flashing gap, not a flue problem. We check the flashing before assuming the liner is at fault, because rusted liner tops and wet ceilings share a cause more often than not.
Loose Caps After High Wind
A chase cap that shifts in a spring storm opens a gap the flashing can’t cover. Reseating the cap and re-flashing the joint is often all that’s needed to stop the leak.
Chimney Crown Repair in Irving
Chimney Crown Repair in Irving is mostly masonry work, and it’s the fix that matters most on the city’s older south Irving homes. The crown is the concrete or mortar cap on top of the chimney that sheds water away from the flue. When it cracks, water gets in, freezes, and pops the surrounding mortar loose. A crown repair in Irving typically runs $300 – $750, with a full crown rebuild on a badly deteriorated chimney running higher. We always look at the crown alongside the cap, because a chimney with no cap lets in birds and rain, and the crown is where the damage shows.
Cracked Mortar and Spalling
Spalled brick and crumbling crown mortar tend to show up together on south Irving chimneys that have gone years without a cap. Repointing the mortar bed and resurfacing the crown stops the cycle before it reaches the flue.
When a Crown Needs Rebuilding
Hairline cracks get patched. A crown that’s separated from the flue or crumbling across its surface gets rebuilt, because patching over a failed base just delays the same repair a season or two.
Trusted Brands We Service in Irving
Irving’s prefab fireplaces ship with manufacturer-specific flue and cap components, and we work with the brands that supply them: DuraFlex for liner systems, Olympia Chimney for prefab chase and venting parts, Gelco, Famco, and Copperfield for cap and venting solutions, and HeatShield for interior resurfacing on masonry flues. We don’t claim to keep parts in stock. What matters more is that we identify the unit’s make and model first, then order the component that actually fits it, which is why a prefab repair in Irving often turns around faster than a full masonry rebuild. Generic parts on a rated firebox are a bad trade, and we don’t make it.
Common Chimney Repair Problems We See in Irving Homes
- Failed chase caps and flashing on newer prefab chases. North Texas rain driven sideways gets past a loose cap and rusts the top of the flue liner. It’s the first failure point on Las Colinas and Valley Ranch homes, and it’s easy to miss from the ground.
- Skipped Level 2 inspections on factory-built units. A prefab fireplace has a rated firebox panel and a liner that can crack or heat-damage without any outward sign. Owners assume a newer chimney needs no yearly inspection, and that’s how a cracked panel goes unnoticed until the first cold-snap burn.
- Uncapped masonry chimneys collecting birds. Older south Irving chimneys without a proper cap draw chimney swifts and starlings by April. The nesting debris blocks draft, and combined with spalling crown mortar it sets up a creosote-heavy first freeze.
- Concentrated creosote after winter outages. When ice storms knock out power, Irving fireplaces that sit idle most of the year suddenly run hard for days. Creosote builds in bursts like that, not gradually.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Irving, TX
We price per job, by written estimate, and the estimate is free. Typical Irving ranges: flashing repair $250 – $600, chimney crown repair $300 – $750, tuckpointing and mortar repointing on a masonry chimney $400 – $1,200 depending on how much of the stack is affected, spalling brick repair $350 – $900, and chimney waterproofing $300 – $700. A full chimney rebuild on a badly deteriorated stack runs considerably higher, and we’ll tell you plainly when a rebuild is the honest answer versus when repointing will hold. What moves the number: roof pitch and access, the make and model of a prefab unit, how far water damage has spread, and whether a cap has to be custom-fitted. Nothing is recommended without camera evidence you can see for yourself, and we’ll say when a repair can safely wait.
We Also Serve Cities Near Irving
Irving sits close to a lot of neighboring communities, and we take repair calls across the area: Farmers Branch, Cockrell Hill, Coppell, and Euless. If you’re in one of those and need chimney repair, the process is the same – a booked inspection, camera evidence, and a written estimate. We cover Irving and the surrounding cities with the same approach.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Irving
Because a prefab chimney’s lifespan is set by its components, not by the age of the house, and the chase cap and flashing fail long before the framing does. Wind-driven rain gets past a loose cap and rusts the top of the flue liner, and a rated firebox panel can crack from heat cycling with no visible sign from the room. A yearly Level 2 inspection on a factory-built unit is how you catch that early. Call (855) 955-5057 to book one.
No. Factory-built fireboxes are rated for manufacturer-specific flue and cap components, so a generic part can void the rating and compromise how the unit vents. That’s why we identify the make and model first, then order the matching DuraFlex, Olympia Chimney, or Copperfield component. It’s the difference between a repair and a workaround.
Often both, and only an inspection separates them. Green or unseasoned firewood and a closed damper cause smoke, but so does a blocked flue from nesting debris or a warped chase cap that’s thrown off the draft. We check the flue and the cap before blaming the wood. Call (855) 955-5057 for an exact quote – estimates are free.
Yes, it matters more than most homeowners expect. An uncapped flue takes in rain and draws chimney swifts and starlings by April, and the nesting debris plus spalling crown mortar blocks draft and sets up a creosote-heavy first freeze fire. Fitting a proper cap is usually one of the cheaper line items on a repair estimate. We’ll show you the flue on camera so you can see what’s in there.
It tells us whether the flue needs sweeping alone or a repair. First-degree creosote is a light, flaky soot that a standard sweep clears. Third-degree is glazed and hardened onto the flue wall, and it can mean the liner is heat-damaged and needs resurfacing with HeatShield or relining with DuraFlex rather than another brush. We diagnose it by camera and show you the footage. Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book Your Irving Chimney Repair Estimate
If your fireplace smokes, your chase cap looks off, or your masonry chimney hasn’t been looked at in years, the next step is a booked inspection, not a guess. Call (855) 955-5057 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Get the camera evidence first, then decide what the repair actually needs.
Written by the team at Irving Chimney Cleaning.