Chimney Repair in Irving, TX | Irving Chimney Cleaning

Chimney Repair in Irving - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Irving Homeowners

Most of the chimney problems we see in Irving don’t announce themselves. A cracked crown, flashing that’s pulled loose, or a flue tile with a hairline fracture all sit quietly until the first cold snap, and then a small issue becomes a safety concern. That’s what this page is about: finding the real problem and fixing it correctly, not patching over what shows on the surface.

Call (855) 955-5057

Our technicians have up to 11 years of experience, and they work with professional-grade materials like DuraFlex and HeatShield – the same brands chimney specialists trust. We handle chimney repair as part of a full chimney service, alongside sweeping and inspection, so one crew can identify, diagnose, and fix what’s wrong. When it’s a straightforward repair, same-day work is often possible. Call (855) 955-5057 to get started.

Chimney Cap Installation

Chimney Cap Installation means fitting a protective cover over the top of the flue to keep out rain, debris, and animals while still letting smoke and gases escape. You need one when the chimney mouth is open to the weather, when birds or squirrels have gotten in, or when water is finding its way down the flue. We work with professional brands like Gelco and Famco for caps that fit your flue properly. Typical cost in Irving runs $150-$400 depending on flue size and cap style. Call (855) 955-5057 to book.

Why an Open Flue Is a Problem

Without a cap, rain falls straight onto the flue and the smoke shelf. Over time that moisture breaks down mortar and rusts dampers. A cap keeps most of that out and protects the cap assembly itself.

Matching the Cap to the Flue

A cap has to match your flue’s dimensions and the way your chimney drafts. Too tight and it restricts airflow; too loose and it doesn’t protect anything. We measure and fit the cap to your specific flue before installation.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement swaps out a cap that’s rusted through, bent, or no longer sealing properly against the flue. It’s needed when the old cap is failing to keep rain and animals out, when it’s sitting crooked after a storm, or when it simply doesn’t fit. We install replacement caps for all common flue sizes and work with Gelco and Famco caps as well as others that meet the same standard. Typical replacement cost in Irving runs $150-$400 including the new cap. Call (855) 955-5057.

Signs Your Cap Has Failed

Rust through the metal, broken mesh on the screen, or a cap that’s come unseated from the flue are the usual tells. Any of these leaves the chimney open to weather and debris. We check the cap as part of every inspection so you know its condition.

When to Repair Instead of Replace

A cap with a single bent screen or a loose fastener can often be repaired. We tell you which is cheaper and more durable before recommending a full replacement. We won’t push a new cap when a repair does the job.

Chimney Liner Installation

Chimney Liner Installation puts a new protective liner inside the flue so smoke, gases, and heat stay within the chimney and don’t reach combustible parts of the house. It’s needed when the existing liner is cracked, deteriorated, or missing entirely, which is a real safety issue for wood and gas appliances. We install DuraFlex liners, which are sized to your flue and appliance. Liner installation typically runs $2,000-$4,500 in Irving depending on flue height and liner type. Call (855) 955-5057 for an estimate.

Why the Liner Matters for Safety

A cracked or missing liner lets flue gases and heat contact framing and masonry that aren’t designed for it. That’s a fire and carbon monoxide risk. A sound liner is one of the most important parts of the system, and it’s worth fixing properly.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Sizing the Liner Correctly

The liner size has to match your appliance’s output, or the chimney won’t draft right. We calculate the correct flue size before ordering the liner. Getting the size right is what separates a lasting installation from a callback.

Chimney Flashing Repair

Chimney Flashing Repair fixes the metal that seals the joint where the chimney meets the roof, which is one of the most common places water gets in. It’s needed when flashing is rusted, pulled loose, or when you’re seeing water stains near the chimney inside. We reseal and re-fit flashing to direct water away from the chase. Typical flashing repair in Irving runs $300-$700 depending on the roof pitch and the extent of the repair. Call (855) 955-5057 to schedule.

Leaks Around the Chase

Most chimney leaks we trace back to flashing, not the flue itself. Water gets behind the flashing and runs down the masonry into the attic or ceiling. We trace the source before recommending repair.

Repair Versus Full Replacement

Loose flashing can often be resealed and re-set. Flashing that’s rusted through or well past its service life needs replacing. The written estimate spells out which approach we recommend and why.

Chimney Crown Repair

Chimney Crown Repair restores the concrete cap at the very top of the chimney, which sheds water away from the masonry below. It’s needed when the crown is cracked, crumbling, or sloping the wrong way, so water runs into the chimney instead of off it. We use HeatShield resurfacing where appropriate to rebuild the crown surface. Typical crown repair in Irving runs $300-$800 depending on the size and condition of the crown. Call (855) 955-5057 for a free estimate.

Why a Cracked Crown Matters

A cracked crown lets water into the masonry, and that water causes freeze-free winter damage and mortar deterioration over time. Small cracks can widen through the seasons. Catching the crown early prevents bigger masonry work later.

Resurfacing With HeatShield

HeatShield is a specialist resurfacing system for chimney interiors and crown repairs. It restores the surface without a full rebuild when the structure is still sound. We assess whether resurfacing or a rebuild is the right call.

Chimney Repair Companies

Chimney Repair Companies are the specialists who diagnose and fix chimney problems, and choosing the right one matters because the work involves fire safety and structural integrity. You need a specialist when a general handyman says “that looks fine” but you’re seeing smoke, water, or a crumbling cap. We specialize exclusively in chimney sweep, repair, and inspection, and we can perform chimney repair as well as diagnostic inspection, so nothing gets missed. Typical diagnostic and minor repair costs in Irving run $150-$500, with larger repairs priced per written estimate. Call (855) 955-5057.

Why Specialists Beat Generalists

A chimney is a technical system, not a cosmetic one. A generalist may not have the tools to see inside the flue or know when a lining failure is a safety concern. That’s the gap a specialist fills.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 955-5057

What to Ask Before You Hire

Ask whether the company inspects before it repairs, whether the estimate is written, and what materials it uses. The answers tell you whether you’re getting real diagnostics or a sales pitch.

Chimney Masonry Repair

Chimney Masonry Repair restores the brick, mortar, and stone that make up the chimney’s outer structure, which takes a beating from weather and time. It’s needed when mortar joints are crumbling, bricks are spalling, or the chimney is leaning or losing mortar. We handle repointing, crown and brick repair, and chimney repair to match the existing masonry where possible. Typical masonry repair in Irving runs $400-$1,500 depending on the reach and extent of damage. Call (855) 955-5057.

Spotting Masonry Damage

Crumbling mortar joints, flaking brick faces, and white staining are signs the masonry needs attention. Left alone, these let water deeper into the structure. Early repair is cheaper than reconstruction.

Repointing and Rebuilding

Repointing replaces the old mortar with fresh material that seals out water and holds the bricks together. Where damage is severe, we rebuild the affected section rather than cover it. The estimate tells you which your chimney needs.

Brands We Service

We install and work with professional-grade chimney products from brands specialists trust. DuraFlex liner systems are engineered for relining damaged flues, and we know where the seams and connections wear over time. HeatShield is a specialist resurfacing system for chimney interiors and crowns, and we use it where a full rebuild isn’t necessary. Gelco and Famco caps and venting components round out the system, so we can address caps, liners, and masonry together.

Our technicians have up to 11 years of experience with these materials and know the details that separate a lasting install from a callback. Whether you have Gelco, Famco, HeatShield, DuraFlex, Olympia Chimney, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Signs You Need a Pro Right Now

  • Water stains near the chimney. Brown streaks on the ceiling or wall near the chimney usually point to flashing or crown failure. Water travels, so the source is often higher than the stain.
  • Crumbling mortar or brick. If mortar is falling out of joints or brick faces are flaking, the structure is losing integrity. That needs a mason’s eye before it spreads.
  • A strong smoke smell in the house. Smoke backing into a room can mean a draft problem or a blocked flue. It’s a sign to stop using the fireplace until it’s checked.
  • A damaged or missing cap. An open flue accepts rain, debris, and animals. That’s an easy fix now and a more expensive repair later.
  • Headaches or unusual smells when the fire is lit. These can point to a blocked or failing liner. Stop using the fireplace and call for an inspection before lighting another fire.

Our Process, Step by Step

  1. 1
    Call and book. We answer the phone and book a visit at a time that works. We answer 24/7 and fast dispatch runs 7am to 7pm, Sunday through Friday.
  2. 2
    Inspect before we diagnose. We look inside the flue and at the masonry, crown, and cap. We photograph what we find so you can see it too, not just take our word for it.
  3. 3
    Explain and give a written estimate. We explain the finding in plain terms and give you a written estimate that sets the price. No surprises after the work starts.
  4. 4
    Do the repair. We complete the repair with the appropriate materials, whether that’s a DuraFlex liner, HeatShield resurfacing, or masonry work. We keep you informed as the job proceeds.
  5. 5
    Confirm and advise on next steps. We confirm the repair is sound and tell you when the next inspection or sweep is due. You leave with a clear picture of your chimney’s condition.

How Much Does Chimney Repair Cost in Irving?

Chimney repair costs in Irving vary widely because the range of jobs is wide. A typical cap installation or replacement runs $150-$400 depending on flue size and cap style. Flashing repair usually runs $300-$700 depending on roof pitch and extent of damage. Crown repair runs $300-$800, and masonry repair runs $400-$1,500 depending on how much of the structure is involved. Liner installation is the larger investment, typically $2,000-$4,500 depending on flue height and liner type. Minor diagnostic and repair work often comes in at $150-$500.

What affects the price most is the scope of the underlying problem, the height and accessibility of the chimney, and the materials required. Flue height drives liner cost, and roof pitch drives flashing cost. The type of damage matters too, since a cosmetic repair costs less than a structural one. To avoid overpaying, ask for a written estimate before any work starts and ask whether the repair is truly necessary or can safely wait. Our free estimate includes a visual inspection and an explanation of what we found, so you know exactly what you’re paying for. Call (855) 955-5057 for your free estimate.

Our Service Area Near Irving

We serve Irving and the surrounding communities, including Double Oak, Hackberry, Shady Shores, Euless, Farmers Branch, Coppell, Grapevine, Cockrell Hill, and Bedford. If you’re in any of these areas, we can schedule a visit and give you a written estimate. Our technicians have up to 11 years of experience, and we can also help with our Irving Chimney Cleaning services for sweeping and inspection when your chimney needs a full service. Call (855) 955-5057 to book.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Frequently Asked Questions About Chimney Repair in Irving

Schedule Your Chimney Repair Service in Irving Today

Don’t let a small chimney problem grow into a bigger one. Our technicians have up to 11 years of experience and handle sweep, repair, and inspection as a complete service, with professional-grade materials like DuraFlex and HeatShield. Call (855) 955-5057 for a free, no-obligation estimate. We answer 24/7.

Written by the team at Irving Chimney Cleaning.

Why Irving Chooses Irving Chimney Cleaning

We set the standard for chimney repair in Irving.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Bryce Padgett
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Renee Hayes
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Colleen Doyle

Ready for Chimney Repair in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Irving.

(855) 955-5057

Request a Free Estimate in Irving

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7