Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Irving, TX
We provide independent Gelco service across Irving: sweeping, Level 2 inspection, creosote removal, and cap work on Gelco prefab fireplaces and venting. What makes our Gelco work different here is the specific failure pattern we look for in this city: units that sit idle through long hot summers, then get fired hard during winter power outages. Our technicians have up to 11 years of experience, and we know these products as hands-on problem solvers, not as factory reps. We service Gelco equipment throughout Irving and can work with you on scheduling. Call (855) 955-5057. We answer 24/7.
Why Irving Residents Choose Us for Gelco Service
We’re an independent provider, not affiliated with or authorized by the manufacturer, and that independence is useful to you. It means we can recommend an OEM part when fit and safety demand it, or a quality aftermarket cap when the OEM option is discontinued or plainly overpriced, and tell you honestly which is which.
Gelco familiarity matters most on the small details: how a particular cap seats on a given flue collar, where a damper assembly tends to seize after a humid North Texas summer, which gasket on a venting run degrades quietly and throws off draft. We work with professional-grade materials across the trade, including DuraFlex and HeatShield for liner and resurfacing work, alongside brands like Olympia Chimney, Famco, and Copperfield. That breadth keeps us from forcing a Gelco part into a job where a different component is the better answer.
Scheduling is straightforward. We book a sweep, walk the system, and show you what we find before anyone talks about repair. That covers a lot of Irving homes.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Irving
These are the Gelco failure modes we run into most, each tied to how homes here actually get used.
- Cracked firebox panels in Gelco 2000 Series prefabs. Thermal shock does it. A firebox that’s been cold for months takes a sudden high-heat burn during an ice-storm outage, and the panels can crack. We inspect panel seams on every sweep before we touch a brush to them.
- Seized damper assemblies in Gelco inserts. Rust and creosote buildup through humid summers leave dampers hard to open, and a damper that won’t open fully spills smoke into the room. We free and test the assembly, and recommend replacement when the mechanism is past saving.
- Corroded cap screens and bird nesting. Gelco caps without stainless mesh rust out and open the flue to birds. In older south Irving neighborhoods, original caps are common, and chimney swifts are nesting by April. A cap upgrade is one of the cheapest fixes we install.
- Degraded flue collar gaskets. On Gelco venting systems, a tired gasket causes draft problems and, worse, a carbon monoxide path into the house. It’s the most overlooked item we find, because prefab units get treated as maintenance-free.
- Glazed creosote hiding behind light use. A fireplace used a few times a year still builds glaze over time. We remove it with specialized tools, not a quick pass with a brush.
Gelco Service in Irving: What Local Conditions Mean for Your Equipment
Las Colinas and Valley Ranch hold a lot of builder-grade Gelco prefab fireplaces installed through the 1980s and 2000s, and many of them have never had a professional sweep. The assumption behind that is understandable: a factory-built unit looks sealed, finished, low-maintenance. It isn’t. Prefab fireboxes accumulate creosote the same way masonry ones do, and the glaze that forms on the firebox walls is exactly what a homeowner never sees from the living room. Add DFW’s pattern of quiet summers followed by intense winter use during outages, and the buildup comes in concentrated bursts rather than a slow seasonal layer. That’s how a Gelco 2000 Series in a Valley Ranch subdivision reaches a decade of service with a firebox nobody has inspected and a damper that’s quietly stiffening. A Level 2 inspection is what makes that visible. We put a camera in the flue and show you the footage, so the recommendation comes from evidence you can see rather than from a sales pitch.
Gelco Models & Products We Service in Irving
We service the Gelco 2000 Series prefabricated fireplace and the Gelco 3000 Series fireplace insert, along with the Gelco Universal Chimney Cap and Gelco Multi-Flue Cap. On prefab and insert work, we prioritize OEM parts for the critical safety pieces, firebox panels and damper assemblies, so fit and performance stay where they should. For caps and screens, we’ll use quality aftermarket parts when the OEM piece is discontinued or overpriced, since a stainless mesh cap that fits correctly does the job regardless of whose label is on it. If a repair is the right call, we repair. Replacement only comes up when the firebox or flue is genuinely compromised.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Irving
Pricing is per job, set by a written estimate, and the estimate itself is free. What drives cost on Gelco work: the size and configuration of the unit, how much creosote has to come out, whether a Level 2 camera inspection is included, and whether the job turns into repair. A cracked panel or a seized damper changes the scope. A cap swap on a Universal or Multi-Flue cap is a different kind of job entirely. We give you a flat price before we book, so you know the number going in. Nothing gets recommended without camera evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait until next season. Call (855) 955-5057 for an exact quote. Estimates are free.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Irving
Smoke after an outage usually means a closed or partially seized damper combined with a flue full of creosote. When the grid drops in Irving, homeowners fall back on fireplaces they rarely use, load in green firewood, and close the damper to hold heat. That traps smoke in the box and pushes it into the room. A Level 2 inspection finds the cause, and creosote removal plus a damper repair usually resolves it. Call (855) 955-5057 to book the inspection.
Annual inspection is the baseline, and a sweep whenever creosote reaches a quarter inch or the unit has seen heavy use. Prefab units aren’t maintenance-free, and here the heavy use tends to arrive in bursts during winter storms. If a Gelco fireplace in Irving sat through a hard outage season, that year’s inspection shouldn’t be skipped. Call (855) 955-5057 to schedule.
Yes, when the panel is cracked but the firebox and chimney structure are otherwise sound. Thermal shock from sudden high-heat burns is the usual cause, and we check panel seams first on any prefab sweep. We prioritize OEM panels for the fit. If the firebox core itself is compromised, we’ll say so and explain why replacement is the safer route. Call (855) 955-5057 for an assessment.
A cap with stainless mesh, sized correctly to the flue, is the right answer in almost every case. Corroded screens and spring bird nesting are the two problems a proper cap prevents, and both are common on older caps around Irving. We install Gelco Universal and Multi-Flue caps and quality aftermarket options where they fit better. Call (855) 955-5057 to have your cap checked.
Usually, yes. Seized dampers on Gelco inserts typically come from rust and creosote buildup over humid summers, and freeing the mechanism is part of the service. If the assembly is too far gone, we replace it and prioritize an OEM unit for fit. Call (855) 955-5057 to get it looked at.
Service Areas Near Irving
Along with our work in Irving, we also serve homeowners in Euless, Double Oak, Hackberry, and Shady Shores. For Gelco cap and venting work on the Dallas County side of the metro, we regularly book jobs in Farmers Branch and Cockrell Hill. Nearby communities with Gelco prefab fireplaces are welcome to call and ask about scheduling. Our Gelco expertise covers the same systems across these areas.
Book Your Gelco Service in Irving Today
If your Gelco fireplace hasn’t been inspected, or the last burning season was heavier than usual, book a sweep and Level 2 inspection before the season turns. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.