Chimney Company in Bedford - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 955-5057

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Bedford, TX

Chimney Inspection is the starting point for almost every call we take in Bedford, and for good reason. This city’s housing stock is largely 1970s and 1980s brick-veneer ranch and two-story homes with masonry fireplaces, plus a share of prefab metal-box fireplaces in later subdivisions, and many of those flues are original. Add North Texas weather that leaves a fireplace idle for nine months and then working hard through January and February cold snaps, and the wear shows up in clay tiles and crowns rather than in heavy soot. We work with professional-grade materials like DuraFlex and HeatShield, and our technicians have up to 11 years of experience. Call (855) 955-5057.

Call (855) 955-5057

Why Bedford Homes Are Different

Bedford sits in the DFW band that gets ice storms and occasional snow, which shapes chimney work here more than burn volume does. Fireplaces in this city get real but infrequent use: enough cold snaps each winter to lay down creosote, never quite enough for most homeowners to think about sweeping. That feast-or-famine pattern means creosote sits in the flue for a couple of seasons, darkening and glazing instead of being brushed out. It’s the core reason we start so many Bedford visits with an inspection rather than a brush.

The housing stock reinforces it. Much of Bedford was built in the 1970s and 1980s, and those chimneys were constructed to an older code era. Inspections here frequently turn up cracked clay tiles, missing caps and worn mortar crowns rather than plain soot. North Texas also delivers long, hot, humid summers followed by short, mild winters broken up by Arctic cold snaps, and the repeated wet-dry and freeze-thaw cycle on brick and mortar does more damage to a Bedford crown than a heavy burning habit ever would. Water intrusion and spalling are the recurring findings, not overloaded flues.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Bedford Services

Beyond inspection, two other jobs come up again and again for Bedford homeowners.

Chimney Sweep in Bedford

A sweep here means more than running a brush down the flue. We remove creosote from the firebox, smoke chamber and flue, then check the damper, the cap and the crown while we’re up there, because in Bedford the cap is often the part that’s failed. The feast-or-famine burn pattern in this city leaves glazed creosote that a light brushing won’t touch, so we assess the stage of the deposit before we start. If you haven’t burned since the last ice storm, that buildup has had two winters to settle in. For the full rundown, see Chimney Sweep in Bedford.

Chimney Sweep in Bedford

Chimney Repair in Bedford

Repair in Bedford is usually about water and time, not fire damage. Original and once-relined flues from the 1970s and 1980s show up with cracked clay tiles, deteriorated mortar joints and caps that have rusted or gone missing, and an uncapped flue here invites birds and squirrels to nest in it through the summer. We reline with DuraFlex where the flue lining has failed, and we resurface interiors with HeatShield when the chimney structure is sound enough to save. Cracked crowns and spalling brick get rebuilt and sealed. The full scope is on our Chimney Repair in Bedford page.

Chimney Repair in Bedford
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 955-5057

Chimney Inspection in Bedford

Chimney Inspection in Bedford exists to answer a question most homeowners here can’t answer themselves: is the flue still sound after years of light, sporadic burning? The 1970s and 1980s masonry fireplaces common in this city were built to an older code era, and many still carry original or once-relined flues. Our Chimney Inspection documents what’s actually there, with photos, so you can see the cracked tile or the missing cap for yourself instead of taking someone’s word for it.

Fireplace Inspection

Signs you need it

You smell something dead or musty the first time you light a fire in November, or the firebox has visible cracks, a sticking damper or smoke that rolls into the room.

What it costs in Bedford

A fireplace inspection in Bedford typically runs $99 to $250, and the written estimate sets the final price.

How we do it

We examine the firebox, damper, smoke chamber and firebox-to-flue transition, check the cap and crown from the roof, and photograph anything that needs attention.

Level 2 Chimney Inspection

Signs you need it

You’re buying or selling a Bedford home, have added a gas insert, or have had a chimney fire or a water leak into the masonry.

What it costs in Bedford

A Level 2 inspection in Bedford typically falls between $150 and $400, with the written estimate fixing the final price.

How we do it

We run a camera through the full flue, inspect accessible portions of the chimney interior and exterior, check attic and crawlspace clearances where reachable, and hand you a photo report.

What Chimney Inspection Costs in Bedford

Item Typical range in Bedford
Fireplace inspection $99 – $250
Level 2 chimney inspection $150 – $400
Camera inspection with photo report $150 – $400

How often should a Bedford chimney be inspected?

Once a year, even in a year you barely burn. Bedford’s sporadic burn pattern lets creosote sit and glaze for two winters, and annual inspections catch cracked tiles and missing caps before water gets into the masonry.

Can an inspection tell me whether repair work can wait?

Yes. We show you the photos and say plainly when a crown or cap can safely wait a season and when it can’t. Call (855) 955-5057 for a free estimate on any recommended work.

Brands We Service in Bedford

We work with an industry-recognized roster of professional chimney brands, including DuraFlex for relining, HeatShield for interior resurfacing, and Olympia Chimney and Gelco for caps and venting components. We don’t stock parts locally, so a repair that needs a specific component gets scheduled once it’s sourced. Turnaround is typically a few days. You can see the full list on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Pricing for Chimney Company in Bedford, TX

Service Typical range in Bedford
Fireplace inspection $99 – $250
Level 2 chimney inspection $150 – $400
Camera inspection with photo report $150 – $400
Standard chimney sweep $150 – $300
Sweep with heavy creosote removal $250 – $500
Chimney cap installation $150 – $450
Crown repair or rebuild $300 – $1,200
Chimney relining (DuraFlex) $1,800 – $4,500
Interior resurfacing (HeatShield) $1,200 – $3,000

What pushes price up in Bedford is usually access and condition, not size: a crown that has spalled down to the brick means rebuilding rather than sealing, and a flue with glazed creosote takes longer to clear than a light soot load. We give you the scope and the price in writing before any work is booked, and that written estimate sets the final number.

Neighborhoods We Serve in Bedford

We cover Bedford from one end to the other, including the 76021 and 76022 ZIP codes and the older ranch subdivisions where original flues are the norm. Whether your fireplace sits in a two-story brick home near Central Drive or a later prefab build off Harwood, the visit is booked the same way: an inspection first, a written estimate second, work only after you’ve approved it. We answer 24/7, and dispatch runs Sunday through Friday, 7am to 7pm, so a call outside that window gets booked into the next opening.

  • Central Bedford
  • Bedford Heights
  • Harwood
  • Brookwood
  • Bedford Estates

Service Area – Cities Near Bedford

Bedford sits in the heart of the Mid-Cities, and we cover the surrounding towns on the same schedule. If you’re just outside the city line, we can still help. Homeowners in Euless, TX and Grapevine, TX get the same inspection-first approach, and so do folks in Coppell, TX and Irving, TX. Call and we’ll confirm coverage for your address before booking.

Serving Bedford, TX – Our Local Coverage Area

We serve Bedford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Bedford

Ready to get started? Free estimates in Bedford
Call (855) 955-5057

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Bedford Customers Say

★★★★★ 4.8 from 8+ reviews

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Bryce Padgett

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Renee Hayes

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Colleen Doyle

How It Works in Bedford

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Bedford. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7