Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Bedford, TX
We provide independent Gelco service across Bedford: cap installation, damper repair, and Level 2 camera inspection on the metal-box fireplaces and inserts that came with a lot of this city’s 1970s and 1980s housing stock. The one thing that makes our Gelco work here different is what Bedford’s burn pattern does to it. Fireplaces in Bedford sit idle for most of the year, then get hammered for a few weeks in January and February. That feast-or-famine cycle is hard on dampers, panels, and caps, and it’s what we plan every visit around.
We work with professional-grade products, and we know Gelco equipment from the inside because it’s the kind of component we see inside prefab and insert installations across North Texas. We also handle sweeping and full repair, so you’re not passed to a second company halfway through. Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bedford Residents Choose Us for Gelco Service
Chimney work isn’t an add-on for us. Sweeping, repair, and inspection are the whole business, and that focus is why we can tell you the difference between a damper that needs freeing up and one that needs replacing.
We’re an independent shop, not affiliated with Gelco or authorized by the manufacturer, so we diagnose your damper, cap, or firebox on its merits. Nobody steers the call toward a factory part you don’t need.
When it comes to fit, we use genuine Gelco parts for the safety-critical pieces – dampers, firebox panels, and cap assemblies – because clearances matter on a metal-box fireplace and a part that’s off by a fraction matters. For caps, flashing, and crown materials on masonry chimneys, a quality aftermarket part does the job fine.
We serve homeowners across Bedford, from the older brick-veneer ranch neighborhoods to the two-story subdivisions built a decade later. Scheduling is straightforward: you get a written estimate with the flat sweep price agreed before we book, and a camera inspection with a photo report you can look at yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Bedford
- Seized pivot dampers. Gelco pivot-style dampers rust open after humid North Texas summers, so the firebox pulls in conditioned air and attic pests all year. Nine idle months is plenty of time for a damper to freeze in position.
- Cracked firebox panels and refractory liners. Repeated freeze-thaw followed by a concentrated January-February burn blitz is what cracks these. A cracked panel is a fire risk, not a cosmetic issue, and it needs eyes on it before the next fire.
- Gas insert pilot assemblies and thermocouples fouling. Dust and humidity collect during the long off-season, so the insert won’t light the first cold night. That’s a common call in Bedford and usually a service issue, not a dead unit.
- Missing or failing caps. Original Gelco caps and open flues take in the bird and squirrel nesting that follows a Bedford ice storm. The first fire of the following season usually announces it.
- Glazed creosote sitting from two winters back. Bedford’s occasional-snow burn pattern means homeowners haven’t burned since the last ice storm, and the creosote from that stretch has been glazing the whole time. Glazed creosote is harder to remove than fresh soot and is the reason a sweep gets booked.
Gelco Service in Bedford: What Local Conditions Mean for Your Equipment
Here’s the local insight that shapes most of our Gelco work in Bedford: many of these fireplaces were built to an older code era, and the flues are original or once-relined. So a Level 2 inspection here more often turns up cracked clay tiles, a missing cap, and original Gelco damper hardware than it turns up heavy soot. The first visit is frequently a camera inspection and a cap job, not a sweep.
Walk through the brick-veneer ranch streets off Harwood Road and you’re looking at exactly that housing stock. The chimneys were built when the standards were different, and thirty-odd years of wet-dry and freeze-thaw on brick and mortar crowns has done more damage than any fire ever did. Bedford’s long hot summers and short, sharp winters drive water intrusion and spalling on crowns and flashing, and water is what kills a cap assembly.
That’s why our gelco chimney cleaning visits in Bedford start with the camera, not the brush. We look before we clean. If the flue is sound and just needs soot removed, you get a sweep. If a tile is cracked or a cap is missing, you’ll see it on the report before anyone quotes a repair.
Gelco Models & Products We Service in Bedford
The Gelco work we do in Bedford covers prefab metal firebox and metal-box fireplace assemblies typical of the 1980s and 1990s subdivision builds here, gas fireplace inserts and gas log sets, replacement dampers and damper assemblies, and chimney caps and multi-flue caps, including custom-sized caps for older masonry flues.
Choosing the right part starts with measuring and matching, not guessing. On a metal-box fireplace, we fit genuine Gelco parts for dampers, firebox panels, and cap assemblies so the clearances are right. On a masonry chimney, a quality aftermarket cap or flashing does the job and saves you money. On an older Gelco prefab box with cracked panels, we’ll weigh an honest repair against replacement. We won’t push a rebuild the firebox can’t safely take.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Bedford
Most Gelco service in Bedford is priced per job from a written estimate, and the estimate is free. A standard sweep, a Level 2 camera inspection, a damper repair, and a cap installation are each quoted on their own, so you know exactly what you’re paying for before we book. What drives the cost is access to the flue, the condition of the damper and firebox panels, whether a cap needs custom sizing for an older masonry flue, and whether the inspection turns up cracked tiles that need repair.
Nothing gets recommended that you can’t verify on the camera footage. And if a repair can safely wait until after the season, we’ll tell you that plainly.
Call (855) 955-5057 for an exact quote. Estimates are free.
Serving Bedford, TX – Our Local Coverage Area
We serve Bedford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Bedford
A house from that era with a metal firebox usually calls for a Level 2 inspection, because a Level 1 visual check won’t show you a cracked panel or a cracked clay tile behind the firebox. Given the age of the housing stock here, we recommend the camera inspection before the first burn of the season. Call (855) 955-5057 to book one and get a written report with photos.
Dust and humidity collect on the pilot assembly and thermocouple over the long idle season, so the pilot won’t hold or the thermocouple reads cold. It’s a common issue in Bedford after nine months of no use, and it’s usually a service call rather than a replacement. Call (855) 955-5057 and we’ll take a look.
Yes. A properly sized cap seals the flue opening, and birds and squirrels can’t nest in a flue that’s capped. After a February ice storm, uncapped flues in Bedford routinely end up with nesting, and the first fire of the following November is when the smell shows up. We’ll clear the flue and fit a cap that fits. Call (855) 955-5057 for a free estimate.
A pivot damper that’s rusted open can often be freed up and serviced if the frame and hinge are sound; if the seat is corroded through, replacement is the honest answer. We look at both before we recommend anything. Call (855) 955-5057 and we’ll tell you which it is.
In Bedford, yes. The wet-dry and freeze-thaw cycle on brick and mortar crowns causes more water intrusion and spalling than burn volume does, because these chimneys sit dry and unused for most of the year and then get hit with a hard freeze. A cap and sound crown are your first line of defense. Call (855) 955-5057 for a free estimate.
Service Areas Near Bedford
We work Gelco service across the mid-cities, including homeowners in Double Oak, Hackberry, Shady Shores, and Farmers Branch. You’ll also find our Gelco service in Euless and Grapevine, and we serve all of Bedford.
Book Your Gelco Service in Bedford Today
Whether you need a sweep, a damper repair, or a camera inspection before the season, we’ll get you on the schedule. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. It’s the straightforward way to know what your chimney actually needs before winter.
Written by the team at Irving Chimney Cleaning.