Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Euless, TX
We provide independent Gelco service throughout Euless, and the thing that makes our Gelco work here a little different is this: most of the Gelco units we see in Euless live inside 1960s-80s brick homes and rental townhomes that have gone years without a sweep. We service Gelco fireplace inserts, prefab fireboxes, door sets and caps, and because we know how these units were built, we can tell a Euless owner whether a warped firebox is worth a rebuild or a replacement. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Euless Residents Choose Us for Gelco Service
We work on Gelco fireplace inserts and prefab fireboxes often enough that the failure patterns are familiar before we open the firebox door. That matters in Euless, where the housing mix puts a lot of different Gelco products in front of a technician on the same street.
We’re an independent shop. We’re not affiliated with, endorsed by, or authorized by Gelco, and we don’t claim to be. What we do is service the equipment with quality parts that fit it: baffle plates, glass, gaskets and louver components where they’re available, and quality aftermarket glass and gasket kits when the original parts channel comes up thin.
Scheduling is straightforward. Tell us what the unit is doing and we’ll book a sweep and inspection, then give you a written estimate before any repair work begins. Our technicians have up to 11 years of experience, and chimney work is all we do. For the broader picture of how we handle Gelco equipment, start there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Euless
- Baffle and firebox wall burn-through or warping. Decades of short, hot North Texas burning seasons take a toll on the steel in Gelco wood-burning inserts. This shows up most in the mid-century and 1990s rental and apartment stock, where the unit may have been run hard by several sets of occupants. A warped baffle distorts draft; a burned-through firebox wall means the shell itself is giving out.
- Seized air-intake louvers and secondary-air controls. On Gelco heat-circulating fireboxes with louvered grilles, the air controls rust and seize, which chokes combustion and drives heavy soot and creosote buildup. A firebox that can’t breathe burns dirty. Freeing the controls is part of the service, not an add-on.
- Cracked or clouded glass and failed door gaskets. Gelco glass-door and screen enclosure sets lose their seal over time. A hardened gasket lets smoke slip past the doors during start-up, and clouded glass usually means the unit has been running cool and smoky for a while.
- Rusted flue collars and chase covers on Gelco prefab tops. Summer humidity and hail on north-facing chimney tops dent and rust chase covers, and once water gets in, it corrodes both the unit and the flue below it. Euless gets hail; the tops take the hits.
- Soot-clogged baffles with poor draw. When the baffle passages fill, the firebox smokes back into the room even after a basic sweep. That’s a sign the unit needs the baffle cleared properly and the flue checked with a camera, not just brushed.
Gelco Service in Euless: What Local Conditions Mean for Your Equipment
On the 76039 side of Euless, whole streets of near-identical brick homes went up in the 1970s, mostly by the same contractor. The exterior-corner chimneys on one block share the same crown style, flue layout and leak points. A technician who sweeps one house on the block can read the neighbors’ chimneys accurately on sight, which is why we can often quote a Gelco cap replacement or a crown repair for a house we haven’t walked into yet. It also means the failures repeat: if one Gelco prefab top on the street has a rusted chase cover letting water into the flue, the one two doors down probably does too. For Euless homeowners, that translates into faster, more accurate estimates and fewer surprises when we get on the roof. If you’re on one of those same-builder streets, mention it when you call, and we’ll know what we’re likely looking at.
Gelco Models & Products We Service in Euless
We service the Gelco equipment Euless homes actually have: wood-burning fireplace inserts in both freestanding and built-in baffle-and-skirt designs, prefab heat-circulating metal fireboxes with louvered grille openings, fireplace glass-door and screen enclosure sets, and universal top-mount and multi-flue chimney caps. Each one fails in its own way, and each one takes a different set of parts to put right.
For inserts and prefab fireboxes, we prefer original baffle plates, glass, gaskets and louver or air-control components where they still exist. When they don’t, quality aftermarket glass and gasket kits are the practical route. We don’t claim to stock or carry Gelco parts locally; what we do is source quality parts that fit the unit in front of us and stand behind the fit.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Euless
Pricing is set per job by a written estimate, and the estimate is free. What drives the number: whether the job is a sweep and inspection or a repair, whether the baffle and air controls need freeing, whether the glass and gaskets need replacing, and whether the chase cover or cap is being swapped. If a Level 2 camera inspection turns up cracked clay tiles or a failing crown, that’s quoted separately so you can see the scope before deciding.
- Sweep and inspection – quoted per job, written estimate before work begins
- Gasket, glass and louver or air-control repair – quoted per job
- Cap replacement and chase-cover work – quoted per job
- Level 2 camera inspection – quoted per job
A typical call is a Gelco heat-circulating prefab firebox in a 1970s-80s Euless brick home or rental townhome where the owner says it’s never been cleaned and the unit smokes into the room. A qualified pro usually finds seized intake louvers and a soot-clogged baffle drawing poorly, original clay flue tiles with cracked joints, and a hail-dented, rusted chase cover on top. The usual fix is a full sweep and Level 2 camera inspection, freeing the air controls, replacing gaskets and the cap, then advising on crown repair or flue relining if the tiles are cracked. Call (855) 955-5057 for an exact quote – estimates are free.
Serving Euless, TX – Our Local Coverage Area
We serve Euless and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Euless
You need a Level 2 inspection. Any insert that has gone years without service, and any unit where a repair is being considered, calls for a camera inspection of the flue, not just a visual check at the firebox. That’s especially true in Euless’s rental-heavy stock, where a unit may have passed through several occupants without a sweep. It lets us see cracked tiles, joint gaps and corrosion before they turn into a bill. Call (855) 955-5057 for an exact quote – estimates are free.
Yes, in most cases the flue can be relined and the Gelco insert kept. Cracked clay tiles are common in Euless’s 1960s-80s brick homes, and a proper reline with a listed liner restores a sound flue around the existing unit. We confirm the insert’s condition first, because a sound flue behind a warped firebox won’t fix the smoking. Call (855) 955-5057 for an exact quote – estimates are free.
Smoke after a sweep usually means seized air-intake louvers, a soot-clogged baffle or a failed door gasket, not a dirty flue. On Gelco heat-circulating fireboxes, the air controls rust and the unit can’t draw properly. A proper service frees the controls, clears the baffle and replaces the gasket, and a camera check confirms the flue is clear. Call (855) 955-5057 for an exact quote – estimates are free.
It affects the chimney too. Expansive clay soil shifts with wet-dry cycles and heaves the brick chimney, which cracks the crown and opens joints, letting water into the flue. In Euless, that plus summer hail and hard freezes is what drives most of the crown and chase-cover damage we see. A visual inspection from the roof catches it early. Call (855) 955-5057 for an exact quote – estimates are free.
Often, yes. On the 76039 same-builder streets, the exterior-corner chimneys share crown style, flue layout and leak points, so a technician who has serviced a neighbor’s house can read yours from the roof and give a ballpark. We still confirm with an on-site inspection before a written estimate, because interior condition varies with how each unit was used. Call (855) 955-5057 for an exact quote – estimates are free.
Service Areas Near Euless
We serve Euless and the surrounding Mid-Cities, including Double Oak, Irving, Hackberry, Shady Shores and Farmers Branch. If you’re in one of the nearby towns and want the same Gelco service, we also cover Bedford and Grapevine. For Euless homeowners, our Euless service page covers the local picture in more detail.
Book Your Gelco Service in Euless Today
Whether your Gelco insert, prefab firebox, door set or cap needs a sweep, an inspection or a repair, we’ll give you a free estimate and a written scope before any work begins. Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.