G

Gelco Chimney Cleaning Service in Irving, TX

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Irving Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco chimney cleaning service in Irving, and what separates our work is that we know how Gelco caps, dampers and crown systems actually age in North Texas. We are not affiliated with or authorized by Gelco. We’re an independent service provider, which means we diagnose the cap or damper in front of us and fix what’s genuinely failed instead of defaulting to a full replacement.

Call (855) 955-5057

Gelco is a chimney cap brand, and caps sit at the exact point where Irving weather does its worst work: pounding summer sun, hail, and then a hard freeze that finds every seam. We handle the Gelco side of your chimney system as part of our sweep, repair and inspection work across Irving, from south Irving’s older masonry fireplaces to the prefab inserts in Las Colinas and Valley Ranch. Our technicians have up to 11 years of experience with this kind of product.

Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Trust Irving Chimney Cleaning for Your Gelco Chimney Cleaning?

Gelco products have quirks that show up only after a few seasons, and we see them often enough in Irving to recognize them fast. The riveted seams on a multi-flue cap work loose. The gasket on a top-mount damper hardens until it stops sealing. Spot welds on stainless caps start to bleed rust onto the crown. A general handyman looks at a chimney cap and sees a metal lid. We look at it and see the specific joints and gaskets that fail.

When parts are needed, we source quality replacement parts that fit Gelco equipment. Where the original profile is still available we go with it; where it isn’t, we spec an equivalent stainless or cast-iron part that does the same job. Either way the fit and function are what matter, and we tell you which route we’re taking and why.

Warranty-safe practice matters here. We don’t drill into or modify a cap, damper or crown beyond what the repair requires, and we keep the original mounting points intact wherever the hardware allows. Our independence is the reason we can be straight with you: no one is telling us to push a replacement, so our recommendation is based on the condition of your actual Gelco unit. That’s the difference between a chimney specialist and a company selling a product line.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Irving

North Texas weather is hard on caps and dampers. The pattern below is what Gelco owners in Irving tend to call us about, and each one has a cause worth understanding before you spend money.

  • Loosened riveted seams on multi-flue caps. The rivets on a multi-flue cap take years of thermal cycling, and the seams gradually open. Once they do, rain no longer sheds off the cap the way it should and instead drips onto the crown and the flue tile tops. That’s the source of the rust streaks and the musty smell in the firebox after a storm.
  • Hardened top-mount damper gaskets. The gasket that seals a Gelco top-mount damper stiffens with heat and age. When it stops sealing, the fireplace pulls cold air down the flue and becomes hard to light, and it smokes on start-up until the flue warms. A fresh gasket or damper assembly usually restores the draft.
  • Rust bleed at stainless cap spot welds. Stainless caps resist corrosion well, but the spot welds are where the protective layer breaks down first. You’ll see brown streaks running down onto the chimney crown. Left alone, the welds weaken and the cap can shift in high wind.
  • Cracked crown coatings at the flue collar. A Gelco crown coating expands and contracts with the seasons, and the flue collar is where it cracks first. Water tracks into the flue through those cracks, which is a slow problem that gets expensive if it goes unaddressed.
  • Caps missing or damaged before spring nesting. Many older Irving masonry chimneys went up without a proper cap, and chimney swifts and starlings nest in uncapped flues by April. A sound Gelco cap closes that opening and keeps birds and rain out at the same time.

A homeowner with a Gelco multi-flue cap often notices rust streaks on the crown and a musty smell in the firebox after rain. The riveted seams have loosened and the cap no longer sheds water away from the flues. A qualified chimney pro inspects the cap, reseals or replaces the failed seam or gasket, and confirms the crown still slopes away from the flue openings. When the Gelco top-mount damper gasket has hardened, the usual fix is a new gasket or damper assembly so the fireplace drafts correctly again.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Gelco Parts & Our Repair-vs-Replace Approach

The decision between repairing a Gelco component and replacing it comes down to the metal and the mechanism, not to what’s easiest to sell. If the cap or damper is structurally sound and only a seam, gasket or fastener has failed, we repair it. If the metal is thinning, the welds are failing, or the mechanism is obsolete, replacement is the honest call and we say so plainly.

For parts, we source genuine Gelco replacement caps, dampers and crown kits when the original profile is still available, and spec equivalent stainless or cast-iron aftermarket parts when it isn’t. We don’t keep a stock of OEM parts on hand; we identify what your unit needs and source the right fit. You’ll get a written estimate that sets the final price before any work begins, so the number doesn’t move once we’re on the roof.

If you’re not sure which way your Gelco cap or damper is heading, call (855) 955-5057 for a free estimate and we’ll tell you what we find.

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. We inspect the Gelco cap, damper and crown together, since a leak at the cap usually shows up on the crown below it. We check seams, gaskets, welds and the slope of the crown at the flue collar, and photograph what we find.
  2. 2
    Repair or install. For a multi-flue cap with loose seams, we reseal or replace the failed seam. For a top-mount damper with a hardened gasket, we fit a new gasket or damper assembly. For a cracked crown coating, we address the crack at the collar before water gets further in.
  3. 3
    Test. We confirm the cap sheds water away from the flues, the damper opens and closes cleanly, and the fireplace drafts correctly on start-up. A cap that fits right sits level and drains off the low side.
  4. 4
    Warranty check. We note what was done and how it was done so your Gelco coverage stays intact. Where the original mounting hardware can be reused, we reuse it, which keeps the install within warranty terms.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 955-5057

Gelco Products We Service & Install in Irving

We work on the Gelco products that sit on top of and inside Irving chimneys, and each one fails in its own way.

  • Gelco Multi-Flue Caps: the riveted seams and their tendency to loosen over time.
  • Gelco Stainless Steel Single-Flue Caps: rust bleed at the spot welds and stability in high wind.
  • Gelco Top-Mount Dampers: gasket hardening and the draft problems it causes.
  • Gelco Chimney Crowns: cracking at the flue collar after thermal cycling.

Whether the job is a cap replacement, a multi-flue cap reseal or a damper repair, we treat the Gelco component as part of the whole chimney system. A cap that isn’t shedding water is a crown problem waiting to happen, and a damper that won’t seal is a draft problem you’ll feel every time you light a fire.

We Also Service These Brands

We’re not tied to one brand. Alongside Gelco, we work with DuraFlex liner systems and HeatShield resurfacing, which means we can handle a liner or an interior resurface on the same chimney where your Gelco cap sits. One company, one diagnosis, no handoff between providers. If your Irving chimney needs a liner or a resurface as well as cap work, we can address both as a complete system rather than as separate jobs.

FAQs – Gelco Chimney Cleaning Service in Irving

Book Your Gelco Service in Irving, TX

If your Gelco cap is leaking, your top-mount damper won’t seal, or your crown coating has cracked, we can take a look and tell you what it needs. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Irving Chimney Cleaning.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (855) 955-5057
Local Service Coverage

Request a Free Estimate in Irving

Tell us what you need - Irving Chimney Cleaning responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7