Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Irving?
Fireplace services in Irving typically run $89 to $275 for a chimney sweep, $150 to $450 for a level-one inspection, and $325 to $1,200 for most repair work, with full relining at the higher end at $1,800 to $4,500. A basic sweep and safety check is the least expensive entry point, and it’s also the one that catches problems before they turn into expensive repairs. The written estimate you get after we look at the fireplace sets the final price, and the estimate itself is free.
Irving has a lot of homes from the 1970s through the 1990s, and those fireplaces tend to fall into two groups: masonry fireplaces that need repointing and damper work, and factory-built fireplaces where the liner is the part that fails. Which one you have changes the number more than anything else on this page.
Key Takeaways
- Chimney sweeping in Irving: $89 – $275 per flue for a standard wood-burning fireplace.
- Level-one inspection: $150 – $450; a level-two inspection with video scanning runs $350 – $750.
- Most fireplace repairs land between $325 and $1,200.
- A DuraFlex stainless reline: $1,800 – $4,500 depending on flue height and liner size.
- HeatShield resurfacing of a damaged flue: $1,400 – $3,200.
- Estimates are free and the price is set per job by the written estimate.
Fireplace Services Cost Breakdown (2026)
Here’s what the work typically costs in the Irving market this year. These are estimates, not quotes. The written estimate you get after an on-site look is what you actually pay.
| Service | Typical 2026 range | What it covers |
|---|---|---|
| Chimney sweep (wood-burning) | $89 – $275 per flue | Creosote removal, firebox brush-down, damper check, basic visual check of the flue |
| Gas fireplace service | $110 – $300 | Log and ember cleaning, burner and venturi check, flame pattern inspection |
| Level-one inspection | $150 – $450 | Readily accessible portions of the chimney, firebox, damper, and cap |
| Level-two inspection (video) | $350 – $750 | Camera scan of the full flue, written report with photos, needed after a chimney fire or before a liner job |
| Chimney cap with screen | $225 – $650 | Gelco or Famco cap sized to the flue, stainless mesh spark screen |
| Damper repair or replacement | $275 – $700 | Top-sealing or throat damper, hardware, mortar bedding |
| Crown repair and reseal | $400 – $1,400 | Crack repair, crown rebuild where the top plate has failed |
| Masonry repointing (limited area) | $500 – $2,000 | Grinding out and replacing failed mortar joints in the stack |
| HeatShield resurfacing | $1,400 – $3,200 | Interior flue repair where the clay tile is spalled but the chimney structure is sound |
| DuraFlex stainless reline | $1,800 – $4,500 | Full-length insulated stainless liner, top plate, and termination |
| Fireplace insert installation | $2,500 – $6,500 | Includes the appliance, liner kit, and connection (equipment cost varies widely by insert) |
What drives those numbers up or down comes down to a few things. Flue height is the biggest lever on any liner job: a single-story chimney near DFW Airport gets you to the low end of the range, and a tall two-story stack pushes it toward the top. The condition of the clay tile matters too, because a flue with sound tile takes a drop-in liner while one with spalling tile needs the interior prepped first, and that’s where HeatShield enters the conversation. Access is another one. A fireplace on an interior wall with a straight vertical flue is a very different job from one with an offset or a pair of elbows in the run. Cap and damper work is priced mostly on the size of the opening and the material you pick, so a Galvalume cap with a stainless screen sits at the low end while a heavier fabricated cap sits higher.
What Affects Fireplace Services Pricing in Irving
Five things move the price more than anything else when we quote a job in Irving. They’re not unique to this city, but how they show up here is specific.
- Fireplace type. A wood-burning masonry fireplace needs creosote removed from clay tile. A factory-built unit has a metal liner with its own clearance requirements, and a gas insert has a burner assembly and venturi that need service. Each type takes different time, parts, and skill, and the price reflects that.
- Year built and what’s behind the wall. Much of Irving’s housing stock went up between the 1970s and the 1990s, and the fireplaces from that era often have top-sealing dampers that weren’t standard in older homes. That’s good news because a top-sealing damper is often the cheapest way to stop a draft, but it also means the flue sometimes needs the damper replaced before a liner can go in.
- Flue height and roof access. A chimney on a single-story ranch in the Las Colinas area is easier to reach than one on a taller home with a steep pitch. Roof safety harnesses, staging, and the time to get up and down all factor into a repair quote.
- Condition of the liner. Sound clay tile is the cheapest outcome. Spalled or cracked tile starts a conversation: resurface with HeatShield if the structure is intact, or reline with DuraFlex if it isn’t. The condition, not the age, decides which path makes sense.
- Cap and damper upgrades. A missing or damaged cap lets water in and lets birds and squirrels in. A Gelco or Famco cap with a stainless screen is one of the more cost-effective additions on this list, and it protects everything else you’ve already paid for.
- Whether a prior owner did anything. Online, it’s obvious when a fireplace has been “fixed” with a tube of caulk and good intentions. Sorting that out takes time, and time is a line on the estimate.
How to Save on Fireplace Services
There are honest ways to keep the number down in Irving and less honest ways that cost you more later. Here’s what actually works.
- Bundle the sweep and inspection. If you’re going to have the chimney swept, having the inspection done in the same visit saves a trip and usually lowers the combined price compared to booking them separately.
- Book before the burning season. Late summer and early fall are quieter. When the first cold snap hits North Texas, everyone calls at once, and the schedule fills. Booking in advance also gives you time to price out a repair instead of taking the first available option.
- Get the level-two inspection before a big repair. A camera scan with a written report sometimes shows the liner is fine and the problem is a cap or damper. That report is cheap next to a reline you didn’t need.
- Fix the cap now, not the ceiling later. A missing cap is a small cost. Water intrusion into the firebox and smoke chamber is a much bigger one.
- Ask for the written estimate. Ours are free. Call (855) 955-5057 to set one up, and we’ll put the scope and the price in writing before anything starts.
One more: if a quote comes in dramatically lower than everything else, ask what’s in it. A sweep that skips the flue because the technician couldn’t reach it, or an inspection that’s really a glance from the hearth, is cheap for a reason.
Why Fireplace Repairs Cost What They Do in Irving
Fireplace work is trades work, and the materials matter. We work with professional-grade products on every job because a liner or a cap isn’t a place to save twenty dollars.
For relining, we use DuraFlex stainless systems. A DuraFlex liner is sized to the flue, insulated, and built to last, and that’s part of why a reline carries the price it does. It also protects you from the consequences of a failed liner, including carbon monoxide in the living space. For interior flue damage where the tile has spalled but the chimney structure is sound, HeatShield is the system we reach for. It’s a resurfacing job, not a cosmetic one, and it takes a trained hand. When a cap or venting component is needed, Gelco and Famco are the brands on our list, and Olympia Chimney rounds out the supplier roster for chimney components. Our technicians have up to experience, and they know the difference between a job that needs a liner and one that needs a resurfacing.
Specializing matters here. This is all we do – sweeping, repair, and inspection under one roof. That’s not a sales line. It’s why the person who cleans your chimney is also the person who can tell you what’s wrong with it, and why there’s no handoff to a handyman who does fireplaces on the side.
When Should You Schedule Fireplace Services in Irving?
The short answer: before you burn, and again after the season if you burn a lot of wood. Irving winters are mild enough that plenty of homeowners only light a fire a few dozen times a season, and that’s easier on the flue than a cold climate would be. But mild winters also mean the fireplace gets used casually, which is exactly when a blocked flue or a failed damper goes unnoticed.
If you’ve just bought a house in Irving, book a level-two inspection before the first fire. You don’t know what the previous owner did to that fireplace, and a camera scan gives you a documented picture you can keep. If you’ve been burning for a few seasons with no sweep, get one. A chimney with significant creosote buildup is a fire risk no matter the outside temperature.
How to Choose a Fireplace Service in Irving
Ask three questions. What does the scope cover? Who does the work? And is the price in writing? A chimney specialist will answer all three plainly. A generalist will talk around them.
It’s also worth asking what materials they work with. If you hear DuraFlex or HeatShield or a similar professional-grade line named specifically, that’s a good sign. If the answer is vague, that tells you something. And if a company wants to sell you a reline before anyone has done an inspection, push back. Everything we do starts with knowing what’s actually wrong. For more on the area we cover, see Irving.
Fireplace Safety: What Not to Do Yourself
Creosote is the hazard here. A blocked or heavily fouled flue can let carbon monoxide back into the room, or a chimney fire can start in the flue and run up the stack. That’s not something to brush out with a broom from the hearth, and it’s not something to diagnose by feel. A trained technician on the roof with proper equipment is the safe way to clear and inspect a flue. If you’ve had a chimney fire, heard a roar or rumble from the pipe, or see puffy black creosote inside the firebox, stop using the fireplace and get it inspected before the next fire. Related reading on Irving Chimney Cleaning covers what the inspection looks for.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Irving?
A chimney sweep in Irving typically costs $89 to $275 per flue. A standard wood-burning fireplace sweep, including a basic visual check of the flue and damper, sits in that range. The written estimate sets the final price. Call (855) 955-5057 for a free estimate.
Is it cheaper to repair or replace a fireplace?
Repair is almost always cheaper, and it’s usually the right call. A fireplace insert installation runs $2,500 to $6,500, while most repairs on this page land between $325 and $1,200, and a reline top out around $4,500. The only time replacement makes sense is when the firebox or chimney structure itself has failed. That’s a conclusion an inspection should support, not a guess. Call (855) 955-5057 for a free estimate.
How much does a chimney inspection cost in Irving?
A level-one chimney inspection typically costs $150 to $450 in Irving. A level-two inspection with a video camera scan, which you’d want before a liner job or after a chimney fire, runs $350 to $750 and includes a written report with photos. Call (855) 955-5057 for a free estimate.
Can you come today?
Same-day service is often possible in Irving, and it’s worth asking when you call. We answer 24/7, and fast dispatch from 7am to 7pm Sunday through Friday gets a technician out. The price is set per job by the written estimate, not by when you call. Call (855) 955-5057 for a free estimate.
How much does a chimney reline cost in Irving?
A DuraFlex stainless steel reline in Irving typically costs $1,800 to $4,500, with flue height and liner size driving the difference. A HeatShield resurfacing job, which handles interior flue damage without a full liner, runs $1,400 to $3,200. Both are professional jobs; neither is a weekend DIY project. Call (855) 955-5057 for a free estimate.
Get a Free Estimate on Fireplace Services in Irving
Fireplace services in Irving aren’t a place to shop on price alone. A sweep that misses buildup, an inspection that misses a cracked tile, or a cap left off for another season all cost more in the long run than doing it right the first time. We do sweeping, repair, and inspection, and we use professional-grade materials because that’s what the work calls for. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.
Pricing reflects the Irving market as of 2026. Irving Chimney Cleaning offers free estimates – call (855) 955-5057.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bryce Padgett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Renee Hayes"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Colleen Doyle