Chimney Repair Cost in Irving - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 955-5057

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

How Much Does Chimney Repair Cost in Irving?

Chimney repair in Irving typically costs between $200 and $6,000 depending on the scope. Small fixes like a new cap or crown repair usually run $200 to $1,200, while a full liner reline can reach $3,500 to $6,000. The written estimate is what sets your final price, and we provide that estimate free.

We work with professional-grade materials like DuraFlex and HeatShield, so the ranges below reflect real parts and real labor for this market, not a rough guess. If you’re unsure which category your chimney falls into, an inspection is the fastest way to find out. We offer sweeping, chimney repair, and inspection as connected services, so nothing gets missed between the cleaning and the fix.

Key Takeaways

  • Most Irving chimney repairs land between $200 and $1,200; structural work like relining runs higher.
  • A free written estimate sets your final price before any work starts.
  • Irving’s clay soils and older masonry homes are common sources of crown and flashing problems.
  • Our technicians have up to 11 years of experience and we specialize in chimneys only.
  • We answer 24/7 at (855) 955-5057, with fast dispatch from 7am to 7pm.

Chimney Repair Cost Breakdown (2026)

Here’s how repair pricing breaks down for the Irving market in 2026. These are typical estimates, not exact quotes. Your written estimate is the number that matters.

Repair Type Typical Range What’s Involved
Chimney cap replacement (Gelco or Famco) $200 – $450 Removing the old cap, fitting a new one sized to the flue, sealing the edges.
Crown repair or rebuild $350 – $1,200 Patching hairline cracks or pouring a new crown. Full rebuild is at the top of the range.
Flashing repair $300 – $800 Re-sealing or replacing the metal where the chimney meets the roofline to stop water intrusion.
Masonry repointing (tuckpointing) $500 – $1,800 Grinding out failing mortar joints and repacking them. Price scales with how much masonry is affected.
HeatShield interior resurfacing $1,200 – $3,200 Resurfacing a damaged but structurally sound flue interior. Less invasive than a reline.
DuraFlex liner reline $3,500 – $6,000 Installing a new stainless liner inside a deteriorated flue. Protects the home from carbon monoxide and fire risk.
Smoke chamber repair $800 – $2,000 Rebuilding the transition point above the damper where smoke collects and masonry breaks down.
Damper repair or replacement $250 – $700

What drives the price up or down? The biggest factor is how far the damage has gone. A cracked crown caught early is a few hundred dollars. The same crown left until water reaches the smoke chamber can turn into a four-figure repair. Liner work is the highest-cost category because it’s technically demanding and uses premium components like a DuraFlex system. Smaller items like caps and dampers stay low because the materials are modest and the labor is quick.

Access matters too. A chimney on a steep roof complicates flashing work. A chimney that’s been capped badly for years may need more masonry attention once the cap comes off. We look at all of it during the estimate so there are no surprises.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 955-5057

What Affects Chimney Repair Pricing in Irving

Two chimneys with the same visible symptom can carry very different repair bills. Here’s what changes the number.

  • Age and construction of the masonry. A lot of Irving’s housing went up in the postwar decades, and older brick chimneys often have mortar joints that have taken on water for years. Repointing a chimney in a neighborhood like Las Colinas or South Irving that has seen several decades of Texas summers is a bigger job than touching up a newer flue.
  • Irving’s expansive clay soils. The ground here swells and shrinks with our wet-and-dry cycles, and that movement shows up at rooflines as flashing gaps and hairline cracks in the crown. When we find cracks, we look at whether they’re cosmetic or whether water is getting behind them.
  • Severity of the damage. A flue that’s only spalling on the surface may qualify for HeatShield resurfacing. A flue that’s lost structural integrity needs a full DuraFlex reline. Those two repairs are in different price tiers, and the inspection is what tells us which one you need.
  • Whether it’s a repair or a rebuild. Repairing a smoke chamber is typically less than half the cost of rebuilding the upper stack. We try to repair before we recommend rebuild, but some chimneys are past the point where patching holds.
  • Parts and brand availability. We work with an industry-recognized roster of brands including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Using the right cap or the right liner system for the flue is not a place to cut corners, and it’s part of why our quotes hold up.
  • Roof access and pitch. A chimney on a low-slope roof is straightforward. A tall chimney on a steep pitch means more time and more setup, and that shows up in the labor line.

How Much Does a Chimney Inspection Cost in Irving?

An inspection typically runs $150 to $400 depending on the level of assessment. It’s the step that makes every repair quote accurate, and we provide a documented assessment of your chimney’s condition so you have a clear picture before anything escalates.

Many homeowners call us after a sweep points out a problem. Others call because they’ve noticed staining on the ceiling or a draft that won’t quit. Either way, the inspection tells us what’s actually going on, and it protects you from paying for a repair you don’t need. You’ll get a written report you can hold onto.

How Much Does It Cost to Reline a Chimney in Irving?

A full liner reline in Irving generally runs $3,500 to $6,000. It’s the highest-value repair we do, and it’s the one that most directly protects your household from carbon monoxide and fire risk.

Relining is technically demanding work. The old flue has to be cleared, measured, and fitted with a new stainless liner that matches the appliance. We use DuraFlex liner systems because they’re built for the job. If your flue is damaged but still structurally sound, HeatShield interior resurfacing may be an option at a lower price point, and it’s a repair most sweep-and-go providers can’t offer. We’ll tell you honestly which one your chimney needs.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

How Much Does Chimney Masonry Repair Cost in Irving?

Masonry work typically ranges from $500 to $1,800 for repointing and $350 to $1,200 for crown repair. Masonry is where a lot of Irving chimneys develop problems first, because our hot summers and occasional hard freezes work mortar joints hard over time.

If you see crumbling mortar between the bricks, spalling brick faces, or a crown with visible cracks, those are the signs. Left alone, water gets behind the brick and the repair grows. We treat the masonry as part of the whole chimney system, along with the cap and the liner, rather than fixing one piece and leaving the rest.

Repair or Replace: Which Makes More Sense?

Repair almost always costs less up front than a rebuild, and for most Irving homeowners the repair is the right call. A $400 crown repair beats a $6,000 rebuild every time when the rest of the chimney is sound.

Replacement starts to make sense when the structural damage is widespread, when the flue can’t hold a liner safely, or when multiple systems (crown, flashing, masonry, liner) all need work at once. We don’t push rebuilds. If a repair will get you another safe decade, we say so. The inspection findings drive the recommendation, and you decide with the numbers in front of you.

How to Save on Chimney Repair

None of these tips involve cutting the wrong corner. They involve catching problems while they’re still small.

  • Get an inspection before the burning season. A chimney checked in the shoulder months gives you time to plan a repair rather than react to one.
  • Fix the crown and flashing early. Water is the most common cause of expensive chimney damage. A small crown fix now prevents a masonry rebuild later.
  • Keep a cap on the flue. A proper cap (we fit Gelco and Famco caps) keeps rain, birds, and debris out. It’s one of the cheapest repairs that pays for itself.
  • Ask for the full estimate in writing. Our estimates are free and itemized. You’ll know what’s included before you commit.
  • Stay with one provider for sweep, repair, and inspection. When the same company diagnoses and fixes the problem, you avoid paying twice for the same discovery.

Call (855) 955-5057 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm means we can often see your chimney the same day.

Why Irving Homeowners Call Us for Chimney Repair

We specialize in chimneys. Sweeping, repair, and inspection are the three things we do, and we do them as an integrated service so a problem found during a sweep doesn’t get handed off to someone else to fix.

Our technicians have up to 11 years of experience. We work with professional-grade materials including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, which means the repair we recommend is the right system for your flue, not whatever a generalist has on hand. A chimney is more than a flue; it’s a cap, a liner, masonry, and flashing working together. We repair it as a complete system.

If you’re comparing us to a bargain sweep, ask them whether they offer HeatShield resurfacing or DuraFlex relining. Most don’t. If you want a documented assessment and a repair that holds, that’s where we come in. Learn more about Irving Chimney Cleaning and the services we offer.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

FAQs – Chimney Repair Cost

How much does chimney repair cost in Irving?

Most Irving chimney repairs fall between $200 and $1,200, with structural work like relining reaching $3,500 to $6,000. The final price is set by the written estimate, which is free. Call (855) 955-5057 to schedule yours.

Can you fix my chimney the same day?

Often yes for smaller repairs like a cap or a damper. Larger masonry and liner jobs are usually scheduled after the estimate. We answer 24/7, with fast dispatch from 7am to 7pm, so call (855) 955-5057 and we’ll find the soonest opening.

Is it cheaper to repair or replace a chimney?

Repair is almost always cheaper: a crown or flashing fix runs hundreds of dollars versus thousands for a rebuild. If multiple systems are failing at once, replacement can make sense. The inspection tells us which one applies. Call (855) 955-5057 for a free estimate.

How much does a chimney liner cost in Irving?

A full DuraFlex liner reline typically runs $3,500 to $6,000. HeatShield interior resurfacing can be less if the flue is still structurally sound. Get an inspection first; call (855) 955-5057 for a free estimate.

Do you charge for the estimate?

No. The estimate is free, and the final price is set per job by the written estimate. Call (855) 955-5057. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Get Your Free Estimate

If your chimney needs attention, the fastest way to know what it will cost is to have it looked at. Call us at (855) 955-5057 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm means we can often get out the same day.

A clean chimney is the starting point. We also inspect and repair so nothing gets missed, and the number we give you in writing is the number you pay.

Pricing reflects the Irving market as of 2026. Irving Chimney Cleaning offers free estimates – call (855) 955-5057.

Written by the team at Irving Chimney Cleaning.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Bryce Padgett

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Renee Hayes

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Colleen Doyle
Need Chimney Cleaning help in Irving? Licensed & insured · free written estimates
Call (855) 955-5057

Request a Free Estimate

Tell us what's going on in Irving. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7