Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Irving?
A stainless steel liner install in Irving typically runs $2,900 to $6,800 depending on liner length, diameter and whether the flue needs prep work, while a partial chimney rebuild usually falls between $3,400 and $9,500. Full top-to-bottom rebuilds on older Irving masonry chimneys can reach $12,000 or more. Those are real ranges for this market, and the written estimate you get after an inspection is what sets your final price.
Irving Chimney Cleaning works with professional-grade liner and rebuild materials, including DuraFlex for stainless relining and HeatShield for interior resurfacing, the same brands chimney specialists trust. Our technicians have up to experience, and every job starts with a documented inspection so you know exactly what you’re paying for before anyone touches the flue.
Key Takeaways
- Typical liner installation: $2,900-$6,800. Partial rebuild: $3,400-$9,500. Full rebuild: up to $12,000+.
- Liner material and length drive most of the cost; masonry damage drives rebuild pricing.
- HeatShield resurfacing often costs less than a full reline when the existing flue is still structurally sound.
- A documented inspection before you commit to repair is the single best way to avoid overspending.
- Free estimates: call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items stack up for Irving homeowners in 2026. These are estimated ranges for typical jobs, not a quote. A free written estimate pins down your actual number.
| Line Item | Typical 2026 Range (Irving) |
|---|---|
| Chimney inspection (documented, with report) | $150-$450 |
| Stainless steel liner install (DuraFlex, standard run) | $2,900-$6,800 |
| HeatShield interior resurfacing (cast-in-place repair) | $2,200-$4,600 |
| Liner replacement with old liner removal | $3,400-$7,200 |
| Repairing a cracked or deteriorated flue tile | $600-$2,400 |
| Partial chimney rebuild (upper stack and crown) | $3,400-$9,500 |
| Full chimney rebuild (top to firebox) | $9,000-$12,000+ |
| Chimney cap replacement (Gelco, Famco, Olympia) | $250-$800 |
| New crown (masonry) | $650-$1,600 |
Several things push those ranges around. Liner length matters most: a two-story Irving home with a long flue run costs more in material than a single-story ranch, and a full reline usually involves removing the old liner first, which adds labor. If a clay flue has broken tiles, that has to come out before a new stainless liner goes in, so the prep line grows. On the rebuild side, the big cost swing is how far the damage reaches. A rebuild limited to the above-roof stack is a very different job from one that runs down through the smoke chamber. Homeowners in older Irving neighborhoods with original masonry chimneys more often land in the partial or full rebuild tiers. The quieter factor is time: a chimney that’s been deferred for a few seasons usually costs more to bring back than one caught early by an inspection.
What Affects Chimney Liner & Rebuild Pricing in Irving
- Liner length and home height. A longer flue run means more liner and more labor, and two-story Irving homes sit right at the top of the standard range. Ask for the liner footage in your estimate so you can see what you’re paying for.
- The state of the existing flue. If the clay tile is intact, a new stainless liner can often be run with straightforward prep. Broken or spalling tile has to be removed first, and that removal is what pushes a liner install toward the high end of the range.
- Interior resurfacing versus full reline. HeatShield resurfacing is a cast-in-place repair that restores a deteriorated flue lining from the inside, and when it’s the right fit it usually lands below a full reline. It isn’t right for every chimney, which is why the inspection comes first.
- Masonry condition on older homes. Irving has plenty of established neighborhoods with chimneys that have spent decades in the Texas sun and through violent spring hailstorms. Cracks, spalling brick and a failed crown are the usual reasons a rebuild climbs from partial to full.
- How far the rebuild reaches. Damage confined to the stack above the roofline is a partial rebuild. Damage that extends to the smoke chamber or firebox brings the whole structure into play, and that’s where full rebuild pricing starts.
- Cap, crown and accessories. A new cap from Gelco, Famco or Olympia Chimney, or a fresh masonry crown, is often folded into a liner or rebuild estimate. These small items protect the work above from the next hailstorm, so they’re worth including.
If you want to understand where your chimney fits, the fastest path is a documented inspection. Irving Chimney Cleaning handles sweeping, repair and inspection as three connected services, so the person who reads your flue is the same kind of specialist who repairs it. No handoff, no gaps in who’s accountable. That’s part of what we mean when we say we specialize in chimneys. It’s all we do.
How to Save on Chimney Liner & Rebuild
There’s no coupon for a rebuild. The savings come from timing and from choosing the right repair instead of the biggest one.
- Book the inspection before the burning season. Fall and early winter are the crunch. Getting an assessment done ahead of it means you’re not making a decision under pressure, and small problems get caught while they’re still small.
- Ask whether HeatShield resurfacing fits your flue. If the structure is sound and only the lining surface has deteriorated, resurfacing can cost less than a full stainless reline. If a contractor only installs liners, they’ll sell you a liner. Ask the question directly.
- Treat the cap and crown as maintenance, not decoration. A failed crown lets water into the masonry, and water in the masonry is the root of most rebuilds. Replacing a cracked crown now is a fraction of a rebuild later.
- Get the whole chimney looked at, not just the flue. Chimney problems don’t stop at the flue. Caps, liners and masonry are one system. Catching a cap issue during a sweep saves you a rebuild down the road.
- Get a documented report before you approve anything. A clear inspection report tells you what’s actually wrong, in order of urgency. You can sequence the work and spread it across seasons instead of taking the biggest possible bill in one shot.
Estimates are free, and there’s no fee to have a specialist look at your chimney and tell you where you stand. Call (855) 955-5057 for yours.
Repair or Replace: Which Makes Sense for Your Irving Chimney?
Repair is usually the right call when the liner surface has deteriorated but the flue structure is intact, and replace is the right call when the clay tile or masonry has failed enough that a new liner would just sit inside a broken shell. The middle ground is HeatShield resurfacing, which repairs the inner surface without pulling the chimney apart. The test is simple: an inspection that actually measures the condition of the flue, not a glance from the roof.
One safety note we never skip. A damaged chimney liner is a serious matter. It’s the barrier between flue gases and the wood framing of your home, and when it fails, carbon monoxide and heat have a clear path into the structure. That’s not a problem to patch and hope. Any work on the flue itself, and anything involving heights or the chimney crown, should be done by a trained chimney professional. We’ll always tell you plainly what’s safe to hold off on and what isn’t.
Why Product Knowledge Changes the Price You Pay
The brands in a chimney estimate tell you a lot about the estimate. We work with DuraFlex for stainless relining, HeatShield for interior resurfacing, and Gelco, Famco, Olympia Chimney and Copperfield for caps and venting. These are trade-level products, and knowing which one fits which flue is the difference between a repair that holds and one you’re paying for twice. A liner sized wrong or set without proper insulation can fail early, and a rebuild done with the wrong mortar mix in North Texas heat and hail won’t last the way it should.
That’s why we treat the diagnosis as part of the job. The company that cleans your chimney should be able to inspect it and fix it, because the person sweeping is often the first to see trouble and the last to have the tools to address it. Our technicians have up to experience, and we bring that experience to the diagnosis, not just the brush.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Irving?
A stainless steel liner install in Irving typically costs $2,900 to $6,800 in 2026, with the final number depending on liner length, diameter and how much prep the existing flue needs. If the old liner has to come out first, expect the top half of that range. Call (855) 955-5057 for an exact quote. Estimates are free.
How much does a chimney rebuild cost in Irving?
A partial chimney rebuild in Irving usually runs $3,400 to $9,500, and a full rebuild can reach $12,000 or more. The gap comes down to how far the damage extends: above the roofline is partial, down into the smoke chamber or firebox is full. Call (855) 955-5057 to get a documented assessment before you decide.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the flue structure is still sound, and HeatShield resurfacing typically costs $2,200 to $4,600 versus a full stainless reline at $2,900 to $6,800 or more. A full reline is the better value when the existing tile has already failed, because resurfacing a broken shell won’t hold. The inspection tells you which situation you’re in. Call (855) 955-5057 to find out.
Can you come today for a chimney inspection or repair?
Same-day service is often possible, so ask when you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 955-5057 for a free estimate.
Does a chimney rebuild really need a permit in Irving?
Most cities require a permit for structural chimney work and some liner work, so ask Irving’s building department what your job needs before work starts. A specialist who does this every week knows which projects typically trigger a permit and can tell you what to expect. Call (855) 955-5057 and we’ll walk you through it.
Get a Straight Answer on Your Chimney
Pricing a liner or a rebuild without a look at the flue is guesswork, and guesswork is how homeowners end up paying for the wrong repair. We inspect, document and explain what your chimney actually needs, then hand you a written estimate that holds. Whether you’re in a newer part of Irving or an established neighborhood with an original masonry chimney, the process starts the same way: a clear picture of the condition, then a price that matches it. For a broader look at what we do across the area, see Irving Chimney Cleaning, and for the full picture of services in the city we work, visit Irving.
Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.
Pricing reflects the Irving market as of 2026. Irving Chimney Cleaning offers free estimates – call (855) 955-5057.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bryce Padgett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Renee Hayes"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Colleen Doyle