Chimney Repair in Irving, TX | Irving Chimney Cleaning

Chimney Repair in Irving - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Irving

Chimney repair in Irving usually comes down to two very different chimneys. In Las Colinas and Valley Ranch, we’re often working on factory-built fireplaces from the 1980s through the 2000s, where the fix means matching a specific flue or cap component to the original unit. In south Irving, it’s older masonry that has gone a decade or more without attention. We know which parts of the city have which, and it changes how we approach the job before we ever open a toolbox. Call (855) 955-5057 and we’ll book an inspection.

Call (855) 955-5057

Why Irving Homeowners Call Irving Chimney Cleaning for Chimney Repair

We handle three things: sweeping, repair, and inspection. That focus is the reason a repair call here isn’t a handoff between a sweep who spots a problem and a mason who never saw the inside of the flue. The same company that diagnoses the issue is the one that fixes it, so nothing gets lost between visits.

Our technicians have up to 11 years of experience, and they work with professional-grade brands like DuraFlex, HeatShield, Olympia Chimney, and Gelco – the names that actually matter when a factory-built unit needs a manufacturer-specific part rather than a generic substitute. We can work with your insurer on covered damage, and we document our findings with photos so you’re not taking anyone’s word for what’s wrong.

Response times to Irving are straightforward. When you call, we book you into the next available opening, Sunday through Friday, 7am to 7pm, and the phone line itself is answered 24/7. We don’t promise a technician within the hour. What we do promise is a clear picture of what your chimney needs before anyone recommends a dollar of work.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Flashing Repair in Irving

Chimney Flashing Repair in Irving is one of the most common fixes we make on prefab chases, because the flashing is the first thing to fail when a chase cap works loose. Flashing is the metal collar where the chimney meets the roof. When it lifts, wind-driven North Texas rain gets underneath it and runs down the outside of the chase, rusting the top of the flue liner from the outside in. You’ll usually spot it as a water stain on the ceiling near the chimney, or as rust streaks on the chase itself. A flashing repair in Irving typically runs $250 – $600 depending on roof pitch, how much of the old flashing has to come off, and whether the cap needs reseating at the same time.

Water Stains Near the Chase

Staining on the ceiling or the chase siding almost always traces back to a flashing gap, not a flue problem. We check the flashing before assuming the liner is at fault, because rusted liner tops and wet ceilings share a cause more often than not.

Loose Caps After High Wind

A chase cap that shifts in a spring storm opens a gap the flashing can’t cover. Reseating the cap and re-flashing the joint is often all that’s needed to stop the leak.

Chimney Crown Repair in Irving

Chimney Crown Repair in Irving is mostly masonry work, and it’s the fix that matters most on the city’s older south Irving homes. The crown is the concrete or mortar cap on top of the chimney that sheds water away from the flue. When it cracks, water gets in, freezes, and pops the surrounding mortar loose. A crown repair in Irving typically runs $300 – $750, with a full crown rebuild on a badly deteriorated chimney running higher. We always look at the crown alongside the cap, because a chimney with no cap lets in birds and rain, and the crown is where the damage shows.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 955-5057

Cracked Mortar and Spalling

Spalled brick and crumbling crown mortar tend to show up together on south Irving chimneys that have gone years without a cap. Repointing the mortar bed and resurfacing the crown stops the cycle before it reaches the flue.

When a Crown Needs Rebuilding

Hairline cracks get patched. A crown that’s separated from the flue or crumbling across its surface gets rebuilt, because patching over a failed base just delays the same repair a season or two.

Trusted Brands We Service in Irving

Irving’s prefab fireplaces ship with manufacturer-specific flue and cap components, and we work with the brands that supply them: DuraFlex for liner systems, Olympia Chimney for prefab chase and venting parts, Gelco, Famco, and Copperfield for cap and venting solutions, and HeatShield for interior resurfacing on masonry flues. We don’t claim to keep parts in stock. What matters more is that we identify the unit’s make and model first, then order the component that actually fits it, which is why a prefab repair in Irving often turns around faster than a full masonry rebuild. Generic parts on a rated firebox are a bad trade, and we don’t make it.

Common Chimney Repair Problems We See in Irving Homes

  • Failed chase caps and flashing on newer prefab chases. North Texas rain driven sideways gets past a loose cap and rusts the top of the flue liner. It’s the first failure point on Las Colinas and Valley Ranch homes, and it’s easy to miss from the ground.
  • Skipped Level 2 inspections on factory-built units. A prefab fireplace has a rated firebox panel and a liner that can crack or heat-damage without any outward sign. Owners assume a newer chimney needs no yearly inspection, and that’s how a cracked panel goes unnoticed until the first cold-snap burn.
  • Uncapped masonry chimneys collecting birds. Older south Irving chimneys without a proper cap draw chimney swifts and starlings by April. The nesting debris blocks draft, and combined with spalling crown mortar it sets up a creosote-heavy first freeze.
  • Concentrated creosote after winter outages. When ice storms knock out power, Irving fireplaces that sit idle most of the year suddenly run hard for days. Creosote builds in bursts like that, not gradually.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 955-5057

Pricing for Chimney Repair in Irving, TX

We price per job, by written estimate, and the estimate is free. Typical Irving ranges: flashing repair $250 – $600, chimney crown repair $300 – $750, tuckpointing and mortar repointing on a masonry chimney $400 – $1,200 depending on how much of the stack is affected, spalling brick repair $350 – $900, and chimney waterproofing $300 – $700. A full chimney rebuild on a badly deteriorated stack runs considerably higher, and we’ll tell you plainly when a rebuild is the honest answer versus when repointing will hold. What moves the number: roof pitch and access, the make and model of a prefab unit, how far water damage has spread, and whether a cap has to be custom-fitted. Nothing is recommended without camera evidence you can see for yourself, and we’ll say when a repair can safely wait.

We Also Serve Cities Near Irving

Irving sits close to a lot of neighboring communities, and we take repair calls across the area: Farmers Branch, Cockrell Hill, Coppell, and Euless. If you’re in one of those and need chimney repair, the process is the same – a booked inspection, camera evidence, and a written estimate. We cover Irving and the surrounding cities with the same approach.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Irving

Book Your Irving Chimney Repair Estimate

If your fireplace smokes, your chase cap looks off, or your masonry chimney hasn’t been looked at in years, the next step is a booked inspection, not a guess. Call (855) 955-5057 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Get the camera evidence first, then decide what the repair actually needs.

Written by the team at Irving Chimney Cleaning.

Why Irving Chooses Irving Chimney Cleaning

We set the standard for chimney repair in Irving.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Bryce Padgett
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Renee Hayes
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Colleen Doyle

Ready for Chimney Repair in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Irving.

(855) 955-5057

Request a Free Estimate in Irving

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7