Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Irving Homeowners
Most chimney problems in Irving announce themselves quietly: a faint creosote smell when the fire is lit, a streak of rust on the firebox, a bit of daylight where the damper should close flat. By the time smoke backs into the room or brick crumbles onto the hearth, a small issue has usually been working for a couple of seasons. That’s what an inspection is for – finding it while it’s still small.
Our technicians have up to 11 years of experience reading exactly these signals, and we do all three parts of the work under one roof: Irving Chimney Cleaning sweeps, repairs, and inspects, so nothing gets handed off and nothing gets missed between visits. We work with DuraFlex liners, HeatShield resurfacing, and Gelco caps, which means we can identify a problem and fix it rather than just report it. Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection covers the firebox, damper, smoke shelf, firebrick, and the visible flue, all checked as one working assembly. You need one before the first burn of the season, after any chimney fire, when you move into a home with an older masonry fireplace, or if smoke, odor, or draft performance has changed. Irving Chimney Cleaning checks the firebrick for spalling and open joints, verifies the damper seats and seals, examines the smoke shelf for the creosote ledge that causes downdrafts, and confirms the firebox-to-flue connection is sound. A fireplace inspection in Irving typically runs $125 to $250, and a Level 2 version with camera work runs $200 to $400. The written estimate sets the final price.
What the Firebox Check Reveals
The firebox takes the most direct heat in the whole system, so it’s where masonry damage shows first. Spalling brick and washed-out mortar joints let heat reach the framing behind, and a crack straight through the firebox wall opens a path that no flue liner can close. We map those joints and tell you which ones are cosmetic and which ones can’t wait.
Damper and Smoke Shelf
A damper that no longer seals lets conditioned air escape all summer and lets cold air drop into the room. The smoke shelf above it collects soot over time, building a ridge that pushes smoke forward into the room instead of up the flue. We check both, clean what’s blocking them, and note whether the damper frame is still true.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services at Irving Chimney Cleaning are built around the three recognized levels, and we tell you upfront which one your situation calls for so you’re not paying for depth you don’t need. You need an inspection on a routine schedule, at a real estate transaction, after a fire, after a lightning strike or earthquake, or when you change fuel type or appliance. We provide a documented written assessment of the chimney’s condition, with photos of what we find so you can see the evidence rather than take a report on faith. Basic inspections typically run $125 to $250, and camera-assisted inspections run $200 to $400. The written estimate sets the final price.
Three Inspection Levels
Level 1 is a visual check of the readily accessible parts – firebox, damper, flue from the firebox, cap, and exterior. Level 2 adds a video scan of the entire flue plus attics and crawl spaces where accessible, and it’s what we recommend for sales, after a fire, or whenever the flue has been modified. Level 3 opens concealed areas of the chimney when the first two levels point to a hidden problem.

What the Report Includes
You get the findings in writing, with clear language about what’s safe to run, what needs watching, and what needs repair before the next fire. We separate the urgent items from the maintenance list so you can plan rather than panic. If something can safely wait a season, we say so plainly.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the inside surface of the flue, the part of the system that carries every ounce of smoke and heat out of your home. You need one whenever creosote has had time to build, after a fire, when you smell smoke in the house with no fire lit, or when a liner’s condition is unknown. Irving Chimney Cleaning scans the full flue for cracked or missing clay tiles, gaps in mortar joints, glaze-stage creosote, and signs that a previous liner has failed. Flue inspections typically run $125 to $250, with camera-assisted work at $200 to $400. The written estimate sets the final price.
Creosote Stages and Risk
Creosote moves from a light soot to a crusty flake and finally to a shiny, tarlike glaze that ignites at a relatively low temperature. Glaze-stage creosote is what turns a routine sweep into a fire hazard, and it can’t be brushed off with a standard nylon brush once it hardens. Identifying the stage matters, because it decides both how we clean and how urgent the job is.
Clay Tile and Joint Condition
Older masonry flues are lined with clay tiles set in mortar, and those joints crack as the chimney expands and contracts across hot and cool cycles. A crack thinner than a hair still opens a path for heat and carbon monoxide into the wall cavity. We check tile alignment and joint integrity from the top of the flue down.
Chimney Fire
Chimney Fire is the event every inspection is quietly working to prevent, and it’s the main reason you close the air supply and call before relighting. You need an inspection after any chimney fire, even a small one you put out yourself, because the damage often sits where you can’t see it. Irving Chimney Cleaning inspects for cracked tiles, warped dampers, distorted caps, and heat-damaged masonry after a fire, then tells you what has to be repaired before the chimney is used again. Post-fire inspections typically run $125 to $250, and camera scans to find hidden damage run $200 to $400. The written estimate sets the final price.
What a Chimney Fire Damages
Most chimney fires burn hot and short, which is exactly the kind that cracks flue tiles without much visible smoke in the room. The mortar between tiles takes the hit first, and creosote can reignite in the same spot on a later burn. That’s why we inspect the flue after every event, even a minor one.
Signs One Happened
Watch for a loud rumble like a freight train, puffs of black smoke from the top, a sudden drop in draft, or a strong smoky smell that lingers inside the house. Dark, glassy patches on the flue walls are the telltale mark left behind. If you saw any of these, don’t relight until the flue has been inspected.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the most commonly recommended inspection for real estate transactions, after a chimney fire, after a major weather event, or any time the flue system has been altered. Irving Chimney Cleaning uses a video camera lowered through the full length of the flue to look for defects the eye misses from the firebox. It also covers accessible parts of the attic and crawl space, the exterior of the chimney, and the cap and crown, plus a check on connector pipes from any appliance. Level 2 inspections in Irving typically run $200 to $400 depending on chimney height, access, and how many appliances connect. The written estimate sets the final price.
When Level 2 Is Required
Buying or selling a home is the clearest trigger, and most lenders and buyers expect it. A change of appliance – say, switching from a wood-burning fireplace to a gas insert – also calls for it, as does a resized or newly installed liner. Any event that might have damaged the flue, including a chimney fire or tornado, moves you up to Level 2 as well.
Camera and Access
We lower a camera from the top down through the full flue, recording what we find so you can review it. Access to the attic and crawl space is arranged where possible, and the exterior of the chimney gets a close visual pass from the roofline. If something blocks access, we tell you what we could and couldn’t see.
Chimney Leak
Chimney Leak is water getting in where it shouldn’t, and in North Texas it usually announces itself as a ceiling stain well away from the fireplace, which is why homeowners don’t connect the two. You need an inspection when you notice water streaks on the firebox, a musty smell in the room, rust on the damper, or missing chunks of the crown. Irving Chimney Cleaning checks the cap, crown, flashing, and masonry joints, then tells you which defect is actually letting the water in. Leak inspections typically run $125 to $250, with camera work at $200 to $400. The written estimate sets the final price.
Common Entry Points
A cracked crown is the most frequent culprit, because it lets water soak into the masonry from the top down. A missing or damaged cap lets rain straight into the flue, while failed flashing at the roofline opens a gap between the chimney and the roof deck. Step flashing and counter-flashing are where roofers and chimney work most often disagree.
Fixing the Source, Not the Stain
Patching a ceiling stain without addressing the chimney guarantees it comes back after the next hard rain. We identify the actual entry point and repair that, whether it’s a crown rebuild, new flashing, or a properly sealed cap. You get photos of the defect before and after, so the repair is something you can verify.
Chimney Camera Inspection
Chimney Camera Inspection puts an actual video eye inside the flue, and it’s how you find the cracks, gaps, and offsets that a visual check from the firebox can’t reach. You need one whenever the flue has never been scanned, after a chimney fire, at a home sale, or before deciding on a reline. Irving Chimney Cleaning runs a camera the full length of the flue and records the footage, noting every tile crack, mortar gap, and disconnected section it passes. Camera inspections typically run $200 to $400. The written estimate sets the final price.
What the Camera Sees
The camera catches missing or misaligned flue tiles, hairline cracks in mortar joints, creosote buildup at the glaze stage, and the broken sections that a liner has to span. It also reveals offsets and bends where a rigid liner won’t pass but a DuraFlex liner can. None of these show up in a standard visual inspection.
Why Recorded Evidence Matters
Every homeowner’s real fear is being told they need thousands in liner or masonry work with no way to check it. A recording puts that question to rest. You see what we see, so you can decide on the repair with clear evidence instead of a verbal claim.
Brands We Service
We work with professional-grade brands that chimney specialists actually install, and that expertise shapes how we inspect and what we recommend. HeatShield is a resurfacing system for the inside of a masonry flue, so when we find a cracked tile with otherwise sound structure, we can talk through resurfacing versus a full reline honestly. Gelco and Famco cover caps and venting, which is where a surprising number of leaks and downdraft problems originate. Olympia Chimney is another brand we recognize on sight, and knowing its fittings and tolerances makes an inspection faster and more accurate.
Recognizing the brand matters because every system wears differently, and a generic look-down-the-flue check misses the failures specific to each one. Whether you have HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help, and we’ll tell you clearly when a repair can wait and when it can’t. If the work involves liner relining or interior resurfacing, we can handle that too, so you’re not left calling around for a second company.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A damper that won’t open fully, a soot-clogged smoke shelf, or a partial flue blockage will push smoke forward instead of up. It’s a draft failure, not a wood problem, and it gets worse the colder it gets.
- A strong creosote smell when the fire isn’t burning. That odor means creosote has built up enough that warm weather releases fumes from it. Glaze-stage creosote is a fire risk, not just a smell, so it deserves a look before you burn again.
- Water stains or a musty smell near the chimney. Water is coming in somewhere, whether through the crown, the flashing, or a missing cap. Left alone, it rots the masonry and the framing around it.
- Visible cracks in the firebox or flue tiles. A crack that reaches the framing opens a path for heat and carbon monoxide. A camera scan tells you the full extent instead of guessing from what’s visible.
- A chimney fire, even a small one. A rumble, black smoke, or a loud pop means damage may sit inside the flue. Don’t relight until an inspection confirms the flue is sound.
Our Process, Step by Step
- 1
Book a time and confirm which inspection level fits. We ask a few questions about the chimney’s history, the appliance, and anything you’ve noticed, then recommend a level so you’re not paying for depth you don’t need. The flat price is agreed before we book.
- 2
Set up for a clean sweep-through. We lay drop cloths and use a HEPA vacuum at the firebox so soot stays contained. Nothing goes into the room, and nothing gets tracked through the house.
- 3
Inspect the system from both ends. We check the firebox, damper, and smoke shelf from inside, then the cap, crown, flashing, and masonry from the top. Our technicians have up to 11 years of experience reading the wear patterns at each point.
- 4
Run the camera where needed. For a Level 2 or a suspected liner problem, we lower a camera the full length of the flue and record it. You see the footage, so the recommendation is based on evidence, not a sales pitch.
- 5
Write up the findings and agree on next steps. You get a documented report with photos, a clear split between urgent repairs and things that can wait, and a written estimate if repair is needed. Nothing is recommended without camera evidence you can see for yourself.
How Much Does Chimney Inspection Cost in Irving?
A basic Level 1 chimney inspection in Irving typically runs $125 to $250 depending on chimney height, roof access, and how much of the system is readily visible. A Level 2 inspection with full camera work usually runs $200 to $400, with the upper end reflecting taller chimneys, multiple appliance connections, or tight attic and crawl space access. Fireplace inspections on their own typically run $125 to $250, and leak inspections sit in the same range unless the crown or flashing requires a closer look from the roof. When an inspection turns up a liner problem, a reline with a DuraFlex liner runs higher and is quoted separately once the scan is reviewed. Resurfacing a masonry flue with HeatShield is a different scope again, and it’s often the smaller job when the structure is still sound.
What moves the price most is access: a chimney you can reach from a flat roof in a newer Irving home is faster to inspect than one with a steep pitch and a tight chase. Camera work adds cost because it takes time to run the flue and document it. The number of appliances connected – a wood fireplace plus a furnace flue, for instance – also matters, since each one gets checked.
The cheapest way to avoid overpaying is to know the difference between an inspection and a sale. A visual look is not a camera scan, and a scan is not a reason to buy a liner on the spot. Ask which level you’re getting, and ask to see the footage before any repair gets approved. If a company can’t show you the defect, wait.
Our estimates are free, and the price is set per job by the written estimate, so there’s no surprise on the day. What’s included is the full inspection, the documentation with photos, and a written summary of what needs fixing and what can safely wait. Call (855) 955-5057 for an exact quote.
Our Service Area Near Irving
We work throughout Irving and the surrounding Metroplex, including Double Oak, Hackberry, Shady Shores, Euless, Farmers Branch, Coppell, Grapevine, Cockrell Hill, and Bedford. Houses in older neighborhoods here often have masonry chimneys that haven’t been scanned in years, and that’s where a camera inspection earns its keep. We also handle work in Double Oak and Hackberry, and you can check our Irving page for details on the local area. Response times depend on where you are and what’s already booked, and we’ll give you a clear window when you call.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Irving
A chimney inspection is a documented assessment of the chimney’s condition, covering the firebox, flue, cap, crown, flashing, and accessible masonry. It goes beyond a cleaning by identifying damage, blockages, and fire risk before they become expensive. The three recognized levels – 1, 2, and 3 – match the depth of the check to your situation. We tell you which one fits before booking.
A Level 1 inspection usually takes 30 to 45 minutes, and a Level 2 with camera work usually takes 60 to 90 minutes. The time depends on chimney height, roof access, and whether we can get into the attic and crawl space. If we find something that needs a closer look, we’ll tell you before extending the visit. Call (855) 955-5057 for an exact quote – estimates are free.
A basic inspection typically runs $125 to $250, and a Level 2 camera inspection typically runs $200 to $400. The difference comes down to access, chimney height, and how many appliances connect to the flue. The written estimate sets the final price, so there’s no surprise. Call (855) 955-5057 for an exact quote – estimates are free.
Yes, we work with DuraFlex liners and HeatShield resurfacing systems, along with Gelco caps and Olympia Chimney products. Recognizing the brand matters because each system wears differently, and knowing its fittings makes the inspection faster and more accurate. Whether you have HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help. Call (855) 955-5057 for an exact quote – estimates are free.
Same-day inspection is often possible when the schedule allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 955-5057 for an exact quote – estimates are free.
The inspection itself is a documented assessment, and the report is yours to keep regardless of whether you proceed with any repair. Any repair work carries its own terms, which we put in writing alongside the estimate before the job is booked. For example, a reline or resurfacing job is quoted with those terms attached. Call (855) 955-5057 to go over the details for your chimney.
Clear the hearth and the floor in front of the firebox, and make sure we can reach the fireplace without moving heavy furniture. If you know the chimney’s history, have it ready – when it was last swept, what fuel it burns, whether anything’s been modified. For a Level 2, unlocking access to the attic or crawl space helps, but it’s not required if it isn’t safe. We handle the rest. Call (855) 955-5057 for an exact quote – estimates are free.
Schedule Your Chimney Inspection Service in Irving Today
An inspection is cheap compared to the repairs it prevents, and it’s the one step that tells you whether the chimney is ready for the burning season. Our technicians have up to 11 years of experience, and we document everything with photos and camera footage you can review. Call (855) 955-5057 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.