Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Farmers Branch
If your fireplace is smoking into the room or the brick at the crown is flaking apart, you need chimney repair in Farmers Branch from someone who understands what five decades of Texas weather do to a masonry flue. Most of the homes we see here were built in the 1950s through the 1970s, and their original clay tile liners are now the weak point in the system. We run a camera, show you what the liner actually looks like, and fix what the evidence supports. Call (855) 955-5057. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Farmers Branch Homeowners Call Irving Chimney Cleaning for Chimney Repair
Farmers Branch is not the kind of town where chimney work means scraping a creosote-clogged flue every few weeks. It sits well inside the DFW metro with no wildfire history, so the repair calls here come from aging masonry, not from heavy wood burning. The people who call us usually have a ranch home near Rawhide Creek or off Valley View Lane, and they want to know whether the cracked flue tile the last inspector mentioned is a real problem or an upsell. We answer that with a camera inspection and a written report rather than a sales pitch.
We specialize in chimneys only – sweeping, repair, and inspection – and that focus matters when a job turns out to be a HeatShield resurfacing rather than a simple sweep. Our technicians have up to 11 years of experience on masonry fireplaces and stainless liner systems, and we work with the professional-grade brands the trade actually uses: DuraFlex, HeatShield, Gelco, and Olympia Chimney. When a Farmers Branch homeowner needs a liner relined or a crown rebuilt, we can identify, diagnose, and fix it without handing the job off to a different company. That single relationship is why so many of our Farmers Branch customers come back season after season.
Response time to Farmers Branch is short because the city sits right next to our primary service area in Irving – most appointments are booked within a day or two, and same-day work is often possible when you call early. The bigger trust factor is what we find. We tell homeowners plainly when a repair can safely wait until after the burning season, and we say so when the flue is fine. Call (855) 955-5057 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Farmers Branch
Chimney cap replacement in Farmers Branch is usually the first fix we recommend on a postwar brick ranch, because a missing or rusted cap is what lets water and wildlife into a flue that sits dormant most of the year. The job involves removing the old cap, checking the crown and flue tile for damage underneath, and seating a new cap sized to the flue opening with a proper spark screen. Most Farmers Branch caps run $175 – $450 installed, depending on the size of the flue and whether the crown needs repair first. If the cap is gone and squirrels or birds have packed the flue with nesting material, we clear it during the same visit.
Why a cap matters on a dormant flue
North Texas fireplaces sit unused eight months out of the year, and that idle season is exactly when animals move in. A bird or squirrel nest packed into a dormant flue blocks the draft even when there is no fire in the box, and the first cold night of fall is when the homeowner finds out. A screened cap keeps them out and keeps rain off the clay tile.
Signs your cap has failed
Rusted-through mesh, a cap sitting crooked after a windstorm, or water stains on the firebox are all clues the cap is no longer doing its job. A cap that has pulled loose can also let water run down the flue and rust the damper. We check all of it during the inspection.
Chimney Liner Installation in Farmers Branch
Chimney liner installation in Farmers Branch is the higher-value repair here, because the original clay tile liners in 1950s – 1970s masonry fireplaces crack at the joints after decades of North Texas freeze-thaw cycling and stop pulling draft the way they should. The job means running a camera to confirm the cracks, then relining with a listed stainless system such as DuraFlex or resurfacing with HeatShield where the tile is sound enough to coat. Expect $2,800 – $6,500 for a typical Farmers Branch reline, depending on flue height, liner diameter, and whether the crown and smoke chamber need work too. An unlined or deteriorated flue fails modern inspection standards, so this is often the repair that makes the fireplace usable again.
Stainless relining versus resurfacing
When the clay tile is cracked through or missing in sections, a stainless liner is the durable answer. When the tile is intact but pitted or has hairline joints, HeatShield resurfacing can restore the interior without a full reline. We let the camera decide, not the sales sheet.
Why a cracked liner is a safety issue
A liner with cracks lets heat and combustion gases reach the masonry around it, and carbon monoxide can migrate into the house instead of up the flue. This is a job for a trained professional, not a weekend project – we handle the reline and confirm the draft afterward.
Trusted Brands We Service in Farmers Branch
We work with the professional-grade chimney brands that specialists trust, and we mention them because the product under the cap determines how long the repair lasts. DuraFlex stainless liner systems are our mainstay for relining damaged flues. HeatShield handles interior resurfacing where the tile can be saved. Gelco and Olympia Chimney cover caps and venting, so the full system gets addressed rather than just the flue. We do not stock parts or run a warehouse – each job is specified and ordered to fit your flue. That keeps turnaround fast: once the camera inspection confirms the fix, most Farmers Branch projects are scheduled and completed without a long wait. Call (855) 955-5057 to book an inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Farmers Branch Homes
- Cracked clay flue tiles. The original 1950s – 1970s masonry fireplaces here have clay liners that crack at the joints after repeated freeze-thaw cycles, so the draft fails and smoke backs into the room instead of going up. This is the single most common reason a Farmers Branch repair call turns into a reline.
- Cracked and spalling chimney crowns. The postwar brick ranches have crowns that crack and spall, letting water into the flue and mortar. That water shows up later as a rusted damper and crumbling firebox mortar, long before anyone looks at the roof.
- Unlined or deteriorated flues. Many older homes here were built with flues that fail modern inspection standards today, even though they may have passed when new. A camera inspection tells you which category your flue falls into.
- Nests and debris in dormant flues. Because fireplaces sit unused most of the year, birds, squirrels, and even wasp colonies take up residence in flues that went untouched since the previous winter. A blocked flue kills the draft the first time you light a fire in the fall.
Pricing for Chimney Repair in Farmers Branch, TX
Chimney repair in Farmers Branch is priced per job by a written estimate, and the estimate is free. Typical ranges in this market: chimney cap replacement at $175 – $450 installed, mortar repointing and tuckpointing at $600 – $2,400 depending on how much of the crown and stack is addressed, chimney waterproofing at $350 – $900, flashing repair at $450 – $1,200, a stainless reline with DuraFlex at $2,800 – $6,500, and a partial chimney rebuild at $3,500 – $9,000 where the top courses have spalled badly. A Level 1 inspection is the standard starting point; a Level 2 camera inspection is what a repair estimate should be based on. What moves the number is the condition the camera finds, the height of the flue, and how much masonry has to be rebuilt. The written estimate is what sets your final price. Call (855) 955-5057 for yours.
We Also Serve Cities Near Farmers Branch
We work across the northwest Dallas suburbs, so if you’re just outside the city line we can still help. Customers in Farmers Branch often ask us to cover nearby homes in Irving, Coppell, Grapevine, and Euless, and our chimney repair team handles those jobs with the same camera-first approach. Call (855) 955-5057 to schedule.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Farmers Branch
A reline is needed when a camera inspection shows cracked-through clay tiles, gaps at the joints, or a flue that fails modern standards – a sweep alone will not fix that. On the 1950s – 1970s masonry fireplaces here, those cracks are common after decades of freeze-thaw cycling. A sweep cleans creosote; it does not restore the tile. Call (855) 955-5057 for an inspection and a written estimate.
Smoke backing into the room usually means the draft is broken, and the most common cause is a failed flue liner or a flue blocked by nesting material. A cracked clay tile or a nest packed in the flue during the dormant season both kill the draft. A camera inspection tells you which one it is. Call (855) 955-5057 to book it.
Yes – a dormant flue with no cap is where birds and squirrels nest, and that nest is the reason the first fire of the season smokes. A screened cap costs far less than clearing a blocked flue later. Most Farmers Branch cap replacements run $175 – $450. Call (855) 955-5057 for an exact quote; estimates are free.
Yes. A stove used as a primary heat source builds creosote faster than a fireplace burned a few times a month, so the flue should be inspected at the start of every heating season rather than on a longer interval. Even in a ranch where the fireplace sits idle most of the year, the annual inspection is still worth having for the liner and crown checks. Call (855) 955-5057 to schedule one.
A Level 1 inspection is a visual check of the accessible parts of the chimney and firebox; a Level 2 adds a video camera run of the flue and is what a repair estimate should be based on. For an older Farmers Branch ranch with original clay tile, a Level 2 is the one that finds the cracks. We provide a documented report of what the camera shows. Call (855) 955-5057 to book a Level 2 before the burning season.
If your Farmers Branch fireplace is smoking, your crown is spalling, or you simply don’t know what shape the flue is in, get a camera inspection first and a written estimate before any work. We work with DuraFlex and HeatShield because the liner is what keeps the fire and carbon monoxide where they belong, and we show you the evidence so nothing gets recommended that you cannot see for yourself. Call (855) 955-5057 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Irving Chimney Cleaning.